Abstract:1.INTRODUCTION In the physical researches, friction phenomenon that describes the force existing between relative moving surfaces paves a great challenge to the industrial production and the energy efficiency. The friction reduction or elimination in the moving mechanical system would be extremely favorable to the industrial manufacture and the sustainable development of the earth. Therefore, the phenomenon “superlubricity” [1] that refers to friction coefficient less than 0.01 has become an appealing focus in recent years. Superlubricity has been attained both between solid interfaces and across liquid medium. The carbon based materials and two-dimensional materials, such as Molybdenum disulfide [2] and diamond like carbon film (DLC) [3] have been investigated mostly to achieve solid superlubricity. Different from the mechanism of solid superlubricity, the liquid superlubricity was mainly focused on the reduction of shear strength of confined liquid between two friction surfaces. On micro-level, Raviv et al. obtained a super-low friction of alkali salt solutions between mica surfaces by surface force apparatus (SFA) [4]. The liquid superlubricity above was mainly attributed to the hydration effect, leading to the great reduction of energy dissipation in the hydration layer [5]. At macro-scale, there are also some materials found having liquid superlubricity properties. Kato found that superlubricity can be achieved when water was confined between ceramics, where the formation of silica gel provided an efficient boundary lubrication [6]. Recently phosphoric acid solution was found to achieve superlubricity with a friction coefficient of 0.004 [7]. Compared with the solid superlubricity, the water-based superlubricity is more promising for industrial application, because of its nonsensitive to environment conditions. It is interesting and feasible to explore the water-based liquid superlubricity based on other mechanisms. In the present work, we investigated the friction properties of acid solution and a super-low friction coefficient of 0.004 was achieved between polytetrafluoroethylene (PTFE) and sapphire without a running-in process. Here the friction properties were explored with different sliding velocity and pH value of the lubricant, and a further investigation on the mechanism through which superlubricity is obtained has been performed.

Pitted Surfaces Produced by Lactic Acid Lubrication and Their Effect on Ultra-Low Friction

Ultra-Low Friction Achieved by Diluted Lactic Acid Solutions

Superlubricity Achieved With Mixtures Of Acids And Glycerol

Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding

On Lubrication States after a Running-In Process in Aqueous Lubrication.

Toward Low Friction in High Vacuum by Designing Textured A-C/il Duplex Lubricating Film

Superlubricity of a Mixed Aqueous Solution

Adjustable Superlubricity System Using Polyalkylene Glycol with Various Acid Aqueous Solutions

The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves

Analysis of the lubrication process with composition of solid lubricants of laser-modified sliding surfaces

A Pocket-Textured Surface for Improving the Tribological Properties of Point Contact under Starved Lubrication

Superlubricity between sapphire and ptfe achieved by acid

Study of Water Lubrication in Sliding Point Contact Friction Pairs with Hydrophobic Surfaces

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Effect of surface polishing on the tribological performance of hard coatings under lubricated three-body abrasive conditions

Investigations On The Mechanism Of Superlubricity Achieved With Phosphoric Acid Solution By Direct Observation

Surface analysis of iron-based self-lubricating composite under oil lubrication

Macroscale Superlubricity with Ultralow Wear and Ultrashort Running-In Period (∼1 s) through Phytic Acid-Based Complex Green Liquid Lubricants

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Superlubricity of Silicone Oil Achieved Between Two Surfaces by Running-In with Acid Solution

Effect of surface roughness on sliding friction in lubricated contacts-reciprocal experiment study