Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

Elastic-Plastic Torque Analysis of Notched Cross-Section Bars Using the Finite Difference Method

Elastic-plastic Torque Analysis of Notched Cross-Section Cylinder

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Elastoplastic Analysis with Fine Beam Model of Vector Form Intrinsic Finite Element

ELASTIC-PLASTIC ANALYSIS OF 3D SOLIDS USING THE FINITE PARTICLE METHOD

Fine analysis of section stress of steel strand

Experimental study and capacity analysis of double-tapered rectangular steel tubes

TORSIONAL DEFORMATION CALCULATION OF LARGE SPAN THIN-WALLED STEEL BOX GIRDER WITH OPEN SECTION

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Elastoplastic torsional rigidity analysis of the centrifugal concrete- filled thin-wall steel tubes

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Analysis of elastic torsion stress for steel tubular members filled with centrifugal concrete

Elastic and elastic–plastic fields on circular rings containing a V-notch under inclined loads

Modal and Elastic Time-History Analysis of Frames with Tapered Sections by Non-Prismatic Elements

A new model for analyzing nonlinear torsion behavior of concrete filled steel tube columns with rectangular section

Simplified method to identify full von Mises stress-strain curve of structural metals

CROSS SECTIONAL SHEAR STRAIN DISTRIBUTION OF RECTANGULAR CONCRETE FILLED STEEL TUBE COLUMNS SUBJECTED TO TORSION

Complete elastic–plastic stress asymptotic solutions near general plane V-notch tips

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

Numerical Analysis Of Inelastic Deformation Of Doubly Symmetric Stainless Steel Flexural Members

Elasto-plastic analysis for a steel frame-core wall structure with an eccentric tube