Abstract:In this paper, a simplified thermodynamics analysis of cyclic plastic deformation is performed in order to establish an energy transition relation for describing the elastic–plastic stress and strain behavior of the notch-tip material element in bodies subjected to multiaxial cyclic loads. Based on the thermodynamics analysis, it is deduced that in the case of elastic–plastic deformation, Neuber’s rule inevitably overestimates the actual stress and strain at the notch tip, while the equivalent strain energy density (ESED) method tends to underestimate the actual notch-tip stress and strain. According to the actual energy conversion occurring in the notch-tip material element during cyclic plastic deformation, a unified expression for estimating the elastic–plastic notch stress–strain responses in bodies subjected to multiaxial cyclic loads is developed, of which Neuber’s rule and the ESED method become two particular cases, i.e. upper and lower bound limits of the notch stress and strain estimations. This expression is verified experimentally under both proportional and non-proportional multiaxial cyclic loads and a good agreement between the calculated and the measured notch strains has been achieved. It is also shown that in the case of multiaxial cyclic loading, the unified expression distinctly improves the accuracy of the notch-tip stress–strain estimations in comparison with Neuber’s rule and the ESED method. The unified expression of the notch stress–strain calculation developed in this paper can thus provide a more logical approximate approach for estimating the elastic–plastic notch-tip stress and strain responses of components subjected to lengthy multiaxial cyclic loading histories for local strain approach-based fatigue-crack-initiation life prediction.

Elastic-plastic Torque Analysis of Notched Cross-Section Cylinder

Elastic-Plastic Torque Analysis of Notched Cross-Section Bars Using the Finite Difference Method

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Elastic and elastic–plastic fields on circular rings containing a V-notch under inclined loads

Buckling analysis of thin rectangular FG-CNTRC plate subjected to arbitrarily distributed partial edge compression loads based on differential quadrature method

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Plastic Limit Load Analysis of Tee Joint Containing Corner Cracks

Dynamic Buckling Analyses of Functionally Graded Carbon Nanotubes Reinforced Composite (FG-CNTRC) Cylindrical Shell under Axial Power-Law Time-Varying Displacement Load

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Complete elastic–plastic stress asymptotic solutions near general plane V-notch tips

Elastoplastic torsional rigidity analysis of the centrifugal concrete- filled thin-wall steel tubes

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

A Simplified Computation Method of Plastic Limit Load for Tee Joint Containing Corner Cracks

Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

The Three-dimensional Elastic-plastic Analysis of Interlaminar Stresses in Notched Thermoplastic Composites

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

Research on Accumulative Plastic Damage for Low-Cycle Fatigue Analysis of Hull Notched Plate

Probabilistic fatigue assessment of notched components under size effect using critical distance theory

Analysis of Elastoplastic Sharp Notches