Abstract:The series resonance type fault current limiter has the advantages of simple operating principle and topological structure,etc. The primary parameter of series resonance type fault current limiter for high-voltage system is reasonable.However,in the process of restraining fault current after a fault occurrence in electrical network,the capacitor and parallel inverter switch will confront poor working condition.This paper studies the above condition by simulation using the software Matlab.Proceeding from the study,we arrive at the conclusions:1)in the process of closing the inverter switch short circuit capacitor to make the current limiter work in short circuit current limiting mode switching from normal operation mode,there is higher-order of voltage(current)oscillation between capacitor and parallel inverter switch,and the peak value of voltage(current)increases and oscillates with the growing of the speed for closing the inverter switch; 2)when the inverter switch is composed of semiconductor device,control system must respond to short circuit and close the inverter switch quickly,otherwise,the semiconductor device may be damaged by over current(voltage);3)during fault current limiter working in current limiting mode to short circuit loop being shut off by relay protection device,the inverter switch will bear the full fault current and oscillation current.If using semiconductor device as inverter switch,the capacity of semiconductor device must be chosen according to the working condition.

Design and Simulation of Fault Current Limiter with Series Compensation

Simulation Study of Series Resonance Type Fault Current Limiter

Simulation Research on the Effect of the Paralleled Compensating Capacitor on the Solid State Fault Current Limiter Operation

A Novel Topology of DC Distribution Network with Fault Current Limiting Static Synchronous Series Compensator

Hybrid Multifunctional Saturated-core Fault Current Limiter

Experimental Study on the Solid-state Fault Current Limiter with Bypass Inductance

Short Circuit Current Limiter in As Network

Design and Research of a Novel Unified Power Flow Controller with Fault Current Limiter

Simulation Study of New Solid-State Fault Current Limiter

Study on Mathematic Model and Model Simulation of the Three Phase Solid State Fault Current Limiter

Parameters Design and Example of Unified Power Flow Controller with Fault Current Limiting

Protection and Fault Isolation Scheme for DC Distribution Network Based on Active Current-Limiting Control

Saturated-core fault current limiters for AC power systems: Towards reliable, economical and better performance application

Research of fault-current limiter for three-phase four-wire power system

A Novel Six-Leg Three-Phase Fault Current Limiter

Optimization Of Current Breaker And Fault Current Limiter In Dc Micro-Grid Based On Faulty Transient Analysis

Study on Control Strategy of the Three Phase Solid State Fault Current Limiter with Parallel Connected Inductance

Parameter design and optimization of unified power flow controller with fault current limiting

A Modified DC Fault Protection Scheme for Multi-Terminal HVDC Grid Based on Fault Current Limiters

Simulation study on a new solid state fault current limiter for high-voltage power systems

Topology of Current-Limiting and Energy-Transferring DC Circuit Breaker for DC Distribution Networks