Abstract:DC short-circuit fault is a crucial issue in DC grids because the DC fault current increases rapidly with accompanying high fault energy. Limiting the DC fault current is a promising solution to simplify the design of the DC breaker and DC protection. The majority of existing DC fault current limiting (FCL) approaches relies on extra devices, such as DC line inductors. However, the control ability of modular multilevel converters (MMCs) is not optimized. In this study, the submodule (SM) capacitor dynamics during the short DC fault procedure was considered a new control objective, and its effect on the limiting DC fault current was analyzed and revealed. The complex time-varying DC fault transient circuit was comprehensively represented by introducing two base circuit structures and one duty cycle index D. The averaged circuit model was proposed on the basis of the state–space averaging method, which can intuitively show the relation between SM capacitor and DC fault current. The analytical expressions of the DC fault current was given, which can guide the design of the DC FCL control of MMC. The duty cycle index D can represent the discharge of SM capacitors, and the increasing speed of the DC fault current declines with the decrease in D. Accordingly, a feasible FCL control strategy was proposed by choosing D as a tool for affecting and controlling the DC fault current. The proposed FCL control strategy can evidently reduce dc fault current, and avoid the drawbacks of the conventional block or bypass approaches. The simulation results validated the effectiveness of the proposed analysis method and corresponding conclusions.

Optimization Of Current Breaker And Fault Current Limiter In Dc Micro-Grid Based On Faulty Transient Analysis

Parameters Selection Method Of Circuit Breaker And Fault Current Limiter In Mesh-Type Dc Microgrid

Collaborative Control Strategy of Power Electronic Transformer and Fault Current Limiter in DC Microgrid

A Modified DC Fault Protection Scheme for Multi-Terminal HVDC Grid Based on Fault Current Limiters

Hybrid Multifunctional Saturated-core Fault Current Limiter

Bridge-Type Multiport Fault Current Limiter for Applications in MTdc Grids

Optimized design and electromagnetic analysis of a hybrid type DC SFCL in MMC system

Centralized Locating Strategy of Fault Current Limiters in MMC-Based Multiterminal HVdc Grid

A Calculation Method Of Analytical Dc Fault Current In Mmc-Hvdc Grid Including Current-Limiting Devices

Design and Research of a Novel Unified Power Flow Controller with Fault Current Limiter

Generalised Protection Strategy for HB-MMC-MTDC Systems with RL-FCL under DC Faults

Parameter design and optimization of unified power flow controller with fault current limiting

Transient Modeling Method for Faulty DC Microgrid Considering Control Effect of DC/AC and DC/DC Converters.

Topology Modeling and Design of a Novel Magnetic Coupling Fault Current Limiter for VSC DC Grids

A Novel Modularization Design Method of PM Biased SCFCL Considering Leakage Flux Effect and Permeance Matrix Modeling

Combinatorial Multi-Objective Optimization of Resistive SFCL and DC Circuit Breaker in Hybrid HVDC Transmission System

Coordinated DC Interruption Method Based on Magnetic Coupling Current-Limiting and Dissipation

DC Fault Current Limiting Effect of MMC Submodule Capacitors

Topology and Performance Optimization of a Novel Hybrid Material-Based Direct Current Fault Current Limiter

Optimized Design Method of Permanent Magnets Saturated Core Fault Current Limiters for HVDC Applications

A New Topology of Fault-Current Limiter and Its Parameters Optimization