Abstract:In this study, 20Li2O-60V2O5-(20 − x)B2O3-xBi2O3 (x = 5, 7.5, 10 mol%) glass materials have been prepared by the melt-quenching method, and the structure and morphology of the glass materials have been characterized by XRD, FTIR, Raman, and FE-SEM. The results show that the disordered network of the glass is mainly composed of structural motifs, such as VO4, BO3, BiO3, and BiO6. The electrochemical properties of the glass cathode material have been investigated by the galvanostatic charge-discharge method and cyclic voltammetry, and the results show that with the increases of Bi2O3 molar content, the amount of the VO4 group increases, and the network structure of the glass becomes more stable. To further enhance the electrochemical properties, glass-ceramic materials have been obtained by heat treatment, and the effect of the heat treatment temperature on the structure and electrochemical properties of the glass has been studied. The results show that the initial discharge capacity of the glass-ceramic cathode obtained by heat treatment at 280 °C at a current density of 50 mA·g−1 is 333.4 mAh·g−1. In addition, after several cycles of charging and discharging at a high current density of 1000 mA·g−1 and then 10 cycles at 50 mA·g−1, its discharge capacity remains at approximately 300 mAh·g−1 with a capacity retention rate of approximately 90.0%. The results indicate that a proper heat treatment temperature is crucial to improving the electrochemical properties of glass materials. This study provides an approach for the development of new glass cathode materials for lithium-ion batteries.

Lithium Ion-Conducting Glass?Ceramics of Li<sub>1.5</sub>Al<sub>0.5</sub>Ge<sub>1.5</sub>(PO<sub>4</sub>)<sub>3</sub>?xLi<sub>2</sub>O (x=0.0?0.20) with Good Electrical and Electrochemical Properties

Solid Electrolyte Membranes Based on Li2O–Al2O3–GeO2–SiO2–P2O5 Glasses for All-Solid State Batteries

Ionic conduction and crystal structure of aluminum doped NASICON-type LiGe2(PO4)3 glass-ceramic crystallized at different times and temperatures

Preparation and Electrochemical Properties of Li1+xAlxGe2-x(PO4)3Synthesized by a Sol-Gel Method

Self-organized hetero-nanodomains actuating super Li+ conduction in glass ceramics

A facile and scalable process to synthesize flexible lithium ion conductive glass-ceramic fibers

Melt-casted Li1.5Al0.3Mg0.1Ge1.6(PO4)3 glass ceramic electrolytes: A comparative study on the effect of different oxide doping

Li-Ion Conductivity of Single-Step Synthesized Glassy-Ceramic Li10GeP2S12 and Post-heated Highly Crystalline Li10GeP2S12

Water-stable Lithium Ion Conducting Solid Electrolyte of the Li1.4Al0.4Ti1.6−xGex(PO4)3 System (x=0–1.0) with NASICON-type Structure

Na1 + Xalxge2 − Xp3o12 (x = 0.5) Glass–ceramic As a Solid Ionic Conductor for Sodium Ion

Selective Doping to Relax Glassified Grain Boundaries Substantially Enhances the Ionic Conductivity of LiTi2(PO4)3 Glass-Ceramic Electrolytes

Structural and Electrochemical Properties of Li2O-V2O5-B2O3-Bi2O3 Glass and Glass-Ceramic Cathodes for Lithium-Ion Batteries

Preparation and chemical compatibility of lithium aluminum germanium phosphate solid electrolyte

Concurrent Crystallization Mechanism Leading to Low Temperature Percolation of LAGP Glass-Ceramic Electrolyte

Ultrafast Synthesis of I‐Rich Lithium Argyrodite Glass–Ceramic Electrolyte with High Ionic Conductivity

Li+ Conduction in a Polymer/Li1.5Al0.5Ge1.5(PO4)3 Solid Electrolyte and Li-Metal/Electrolyte Interface

Electrochemical stability of a NASICON solid electrolyte from the lithium aluminum germanium phosphate (LAGP) series

Li-ion Transport in All-Solid-state Lithium Batteries with LiCoO2 Using NASICON-type Glass Ceramic Electrolytes

Study on the role of Li2O–Ga2O3-GeO2-Gd2O3 glass doped into Li7La3Zr2O12 solid-state electrolyte

Electrical and Structural Properties of Li1.3Al0.3Ti1.7(PO4)3-Based Ceramics Prepared with the Addition of Li4SiO4

AI-Aided Mapping of the Structure-Composition-Conductivity Relationships of Glass-Ceramic Lithium Thiophosphate Electrolytes