Abstract:The ability to characterise the three-dimensional microstructure of multiphase materials is essential for understanding the interaction between phases and associated materials properties. Here, laboratory-based diffraction-contrast tomography (DCT), a recently-established materials characterization technique that can determine grain phases, morphologies, positions and orientations in a voxel-based reconstruction method, was used to map part of a dual-phase steel alloy sample. To assess the resulting microstructures that were produced by the DCT technique, an EBSD map was collected within the same sample volume. To identify the 2D slice of the 3D DCT reconstruction that best corresponded to the EBSD map, a novel registration technique based solely on grain-averaged orientations was developed -- this registration technique requires very little a priori knowledge of dataset alignment and can be extended to other techniques that only recover grain-averaged orientation data such as far-field 3D X-ray diffraction microscopy. Once the corresponding 2D slice was identified in the DCT dataset, comparisons of phase balance, grain size, shape and texture were performed between DCT and EBSD techniques. More complicated aspects of the microstructural morphology such as grain boundary shape and grains less than a critical size were poorly reproduced by the DCT reconstruction, primarily due to the difference in resolutions of the technique compared with EBSD. However, lab-based DCT is shown to accurately determine the centre-of-mass position, orientation, and size of the large grains for each phase present, austenite and martensitic ferrite. The results reveals a complex ferrite grain network of similar crystal orientations that are absent from the EBSD dataset. Such detail demonstrates that lab-based DCT, as a technique, shows great promise in the field of multi-phase material characterization.

Application of EBSD in Deformation Microstructure Characterization

Investigation of Medium to High Strain Deformation Microstructures Using an Automated Electron Backscattering Pattern (EBSP) System

EBSD-Based Techniques for Characterization of Microstructural Restoration Processes During Annealing of Metals Deformed to Large Plastic Strains

Determining dislocation cell sizes for high-strain deformation microstructures using the EBSP technique

Characterization and Influence of Deformation Microstructure Heterogeneity on Recrystallization

Processing and Interpretation of EBSD Data Gathered from Plastically Deformed Metals

Challenges in EBSD Investigations of Microstructures Formed During Plastic Deformation

3D Ebsd Characterization of Deformation Structures in Commercial Purity Aluminum

A review of EBSD: from rudimentary on line orientation measurements to high resolution elastic strain measurements over the past 30 years.

Segmentation of 3D EBSD data for subgrain boundary identification and feature characterization

Correction of Electron Back-scattered Diffraction datasets using an evolutionary algorithm

Rapid Electron Backscatter Diffraction Mapping: Painting by Numbers

Three-Dimensional Reconstruction of Planar Deformation Features from Single Electron Micrographs

EBSD Analysis of Deformed and Partially Recrystallized Microstructures in ECAE-Processed Copper

Registration between DCT and EBSD datasets for multiphase microstructures

Electron diffraction based techniques in scanning electron microscopy of bulk materials

A machine learning approach to map crystal orientation by optical microscopy

Accurate reconstruction of EBSD datasets by a multimodal data approach using an evolutionary algorithm

Imaging with a Commercial Electron Backscatter Diffraction (EBSD) Camera in a Scanning Electron Microscope: A Review

A review of the preparation methods and techniques of electron backscatter diffraction (EBSD) samples

Alignment of Serial Sections for 3d Microstructural Characterization of Cold Rolled Aluminum by Ebsd