Abstract:In the sheet forming process, the final bending angle is mostly determined based on experience rather than based on a reliable theoretical framework. Furthermore, the local bent areas tend to decrease in thickness. Thus, it is difficult to control the quality of the final products. In this study, we developed an optimized bending angle function by combining segment boundaries to improve the final sheet forming quality and reduce the local thinning defects. The finite element submodel method was used to establish a high-definition thickness-sensitive numerical model for the bottom bending area of the hat-shaped part. This method accurately simulated the thickness variation law of the bending area of roll forming and analyzed the optimization function of the bending angle of the segment boundary as well as the process parameters for local thinning. Finally, roll-bending experiments were conducted to analyze the bending angle distribution conditions and the change law with respect to the process parameters of the cap-shaped parts in case of local thinning defects to verify the accuracy of the finite element simulation process. The results showed that the local thinning defect in the bending area of the hat-shaped part was smaller during roll bending, and the forming quality obtained was better than that obtained using other previously reported methods. The experimental data were consistent with the simulation data, verifying the accuracy of our proposed approach. Moreover, the thickness of the thinning defect was influenced by the process parameters; the plate bending radius and yield strength increased, and thickness thinning gradually decreased. Furthermore, the local thinning defects increased with the increasing plate thickness.

Research on the section distortion of hat-section profiles in rotary draw bending with stretching force

Numerical Analysis of Dimension Precision of U-shaped Aluminium Profile Rotary Stretch Bending

Research on the Cross Section Precision of High-strength Steel Tube with Rectangular Section in Rotary Draw Bending

Study on deformation difference between the contact zone and the non-contact zone of the flexible 3D stretch bending profile and roller dies based on pre-stretching amount

Axial Formation and Cross-Section Distortion Control for Stretch Bending Based on Batch Simulations

Numerical Research on High-Strength Rectangular Section Steel Tube in Rotary-Draw Bending

Study on key technologies of straightening large-scale integrated part's distortion due to machining

Influence of the Curvature of the Multipoint Die for Flexible Multipoint Stretch Bending on the Quality of Aluminum Profile

A new multi-step approach considering bending effects and its application in the stretch bending of rectangular tubes

Numerical Simulation of Distortion of Rectangular Tube with Multi-Point Stretch Bending

Research on key technologies for straightening pocketed aircraft frame parts

Optimization of the hot stretch-bending process for TC4 titanium L-section profile

The influence of multi-point roller-dies on the shape deviation differences of profile in flexible stretch-bending forming

A Method of Constitutive Experiment for Accurate Description of Tube Performance under Rotary-Draw Bending

Study on the Influence of Mandrel Type on Copper Tube Rotary Draw Bending

Effect of discrete roller dies on the contour accuracy of profiles in multi-point flexible stretch-bending forming

Stretch bending process design by machine learning

Effect of Flexible 3D Multipoint Stretch Bending Dies on the Shape Accuracy and the Optimal Design

Research on springback characteristic in flexible multi-points 3D stretch-bending process

Numerical Analysis of Stretch-Bend Forming Precision of Aluminum Extrusion with Unequal Section

Influence of bending angle function on local thinning defects of roll-formed sheets based on segmental boundary combination optimization