Abstract:This study aims to solve the problem of springback control of aluminum alloy components in the rolling process, and the method of combining experiment and simulation is adopted. Firstly, a series of aluminum alloy samples are designed, and the four-axis flexible bending machine is used for precision roll bending. Secondly, the three-dimensional (3D) shape change data of the workpiece before and after roll bending is monitored and recorded in real-time by a high-precision 3D scanner. Meanwhile, aiming at different rolling process parameters of each group (including roll bend speed, feed rate, pre-deformation amount, mold curvature radius, and other factors), advanced finite element software is used to carry out detailed simulation and calculations. In addition, the coincidence is compared and analyzed between the actual experiment results and the simulation prediction. The stress-strain distribution and springback evolution of aluminum alloy during roll bending are described accurately. The experimental and simulation results show that the springback rate of aluminum alloy fluctuates in the range of 5% to 15% after four-axis flexible roll bending, and the specific springback value is influenced by various process parameters. For example, under the premise of keeping other conditions unchanged, when the roll bending speed is increased from 30mm/s to 60mm/s, the springback rate shows an upward trend of about 3%. By increasing the feed rate by 20%, an average decrease of about 7% in springback quantity is observed. It can be seen that the increase in roll bending speed can aggravate the springback phenomenon, and the appropriate increase in feed rate can play a certain role in restraining the springback. Further analysis shows that the choice of the mold curvature radius and pre-deformation amount also has a decisive influence on the springback characteristics. There is a nonlinear relationship between the two parameters and the amount of springback. Changing these two parameters in a specific range can effectively regulate the springback effect.

Influence of the Curvature of the Multipoint Die for Flexible Multipoint Stretch Bending on the Quality of Aluminum Profile

Effect of Flexible 3D Multipoint Stretch Bending Dies on the Shape Accuracy and the Optimal Design

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Study on deformation difference between the contact zone and the non-contact zone of the flexible 3D stretch bending profile and roller dies based on pre-stretching amount

Effect of discrete roller dies on the contour accuracy of profiles in multi-point flexible stretch-bending forming

Research on the influence of die head arrangement on the precision of discontinuous deformation in multi-points stretch-bending of profiles

The influence of multi-point roller-dies on the shape deviation differences of profile in flexible stretch-bending forming

Research on springback characteristic in flexible multi-points 3D stretch-bending process

Analytical springback assessment and compensation in 3D multi-point flexible stretch bending forming

Effect of multi-point roller dies on the forming accuracy of profile in flexible 3D stretch bending technology

Influence of movement tracks on the forming quality of profiles fabricated by flexible stretch bending of multi-point roller dies technology

Springback Study on Profile Flexible 3D Stretch-Bending Process Using the Neural Network

Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy

Numerical Simulation of Distortion of Rectangular Tube with Multi-Point Stretch Bending

Optimization of the hot stretch-bending process for TC4 titanium L-section profile

The behaviour of thin-walled, aluminium alloy profiles in rotary draw bending—A comparison between numerical and experimental results

Research on springback compensation method of 3D flexible stretch bending of multi-point roller dies

Design of an innovative laser-assisted four-point bending forming process for high-stiffened structure of aluminum alloy

Multipass roll forming of variable-curvature elliptical panels using the angular function based on UOSDM

Springback prediction method for double-curved workpiece considering plate anisotropy in multi-point forming

Effect of Stretching on Springback in Rotary Stretch Bending of Aluminium Alloy Profiles