Abstract:Variations in the microstructure and the dominant fretting wear mechanisms of carbon steel alloy in oscillatory sliding contact against stainless steel in a dry atmosphere were evaluated by various mechanical testing and microanalytical methods. These included scanning electron microscopy and energy dispersive spectrometry with corresponding elemental maps of the wear tracks, in conjunction with cross-sectional transmission electron microscopy of samples prepared by focused ion beam machining to assess subsurface and through-thickness changes in microstructure, all as a function of applied load and sliding time. Heavily dislocated layered microstructures were observed below the wear tracks to vary with both the load and sliding time. During the accumulation of fretting cycles, the subsurface microstructure evolved into stable dislocation cells with cell walls aligned parallel to the surface and the sliding direction. The thickness of the damaged subsurface region increased with the load, consistent with the depth distribution of the maximum shear stress. The primary surface oxide evolved as Fe2O3 and Fe3O4 with increasing sliding time, leading to the formation of a uniform oxide scale at the sliding surface. It is possible that the development of the dislocation cell structure in the subsurface also enhanced oxidation by pipe diffusion along dislocation cores. The results of this study reveal complex phase changes affecting the wear resistance of steels undergoing fretting wear, which involve a synergy between oxidative wear, crack initiation, and crack growth along dislocation cell walls due to the high strains accumulating under high loads and/or prolonged surface sliding.

Sliding wear behavior of pearlitic structures in eutectoid steel

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

New insight into the dry rolling-sliding wear mechanism of carbide-free bainitic and pearlitic steel

Microstructure Evolution of a Hypereutectoid Pearlite Steel under Rolling-Sliding Contact Loading

Wear Rate, Frictional Temperature, and Energy Consumption of Steel 52100 with Different Microstructures During Sliding

Phase and Microstructural Evolution in White Etching Layer of a Pearlitic Steel During Rolling–sliding Friction

Microstructure Evolution and Fretting Wear Mechanisms of Steels Undergoing Oscillatory Sliding Contact in Dry Atmosphere

Microstructural feature dependence of dry sliding wear behaviors in a γ-TiAl alloy

Understanding Microstructure-Evolution-dependent Fracture Behaviors in Pearlitic Steels

Understanding Cementite Dissolution in Pearlitic Steels Subjected to Rolling-Sliding Contact Loading: A Combined Experimental and Theoretical Study

On the microstructure evolution and nanocrystalline formation of pearlitic wheel material in a rolling-sliding contact

Grain coarsening of nano laminated structure in martensite steel under sliding wear

Sliding wear behaviour of austempered ductile iron, boron steel and AISI 1045 steel of similar hardness: effect of microstructure, yield strength, and strain hardening

Tribological behavior of heat treated AISI 6150 steel

Friction and wear behaviour of steel with bionic non-smooth surfaces during sliding

Sliding Friction and Wear Properties of GCr15 Steel under Different Lubrication Conditions

Dry Sliding Wear Behavior of Tini Alloy Processed by Equal Channel Angular Extrusion

Study of dry sliding friction and wear behavior of bionic surface of hardened steel

Wear and damage transitions of two kinds of wheel materials in the rolling-sliding contact

In Situ Study of Cementite Deformation and Its Fracture Mechanism in Pearlitic Steels

Micromechanism of wear at polymer-metal sliding interface