Abstract:Featured Application This Procambarus clarkii inspired bionic inspired novel micro-thorn and convex hull coupled structured surface could provide theatrical and technical references to enhance the wear resistance performance of soil-engaging component of agricultural machinery and mitigate the problem of abrasive wear failure. Procambarus clarkii was found to have excellent anti-wear performance against abrasive materials. To improve the wear resistance performance of the soil-engaging component of agricultural machinery, in this study, the micro-thorn and convex hull coupled geometrical structured surfaces inspired from the cephalothorax exoskeleton of the Procambarus clarkii was selected as the bionic prototype. By adopting bionic engineering techniques, three types of novel geometrical structured surfaces were proposed, which were bionic single, double and triple micro-thorn coupled convex hull surfaces (Bionic Type 2, 3 and 4, respectively). The anti-abrasive wear properties of these proposed geometrical surfaces were compared with a conventional bionic convex hull structured surface (Bionic Type 1) and a surface without any structures (smooth). Abrasive wear tests were conducted by using a rotational abrasive wear testing system. The accumulative test time was 80 h and the total wear distance was 6.09 x 10(5) m. By adopting the EDEM software (discrete element modeling), the Archard Wear model was selected to simulate the wear behavior of five different surfaces. In addition, the wear mechanisms of different surfaces were investigated. The results showed that the smooth surface suffered the most severe abrasive were, the abrasion loss reached 194.1 mg. The anti-abrasive properties of bionic geometric structured non-smooth surfaces were greatly improved; the reduction in terms of abrasion losses ranged between 20.4% and 94.1%, as compared with the smooth surface. The wear resistance property of micro-thorn and convex hull coupled structured surfaces were greatly improved as compared with convex hull and smooth surface. Bionic Type 3 was found to have the best anti-abrasive wear property: the abrasion loss was 11.5 mg. The wear morphology was observed by a scanning electron microscope. Smooth surface was characterized with wide, large size of grinding debris, while the bionic non-smooth surface featured narrow and small size abrasive dust. The results obtained from EDEM simulation agreed well with those of the aforementioned real scenario tests. It was revealed that the wear areas of the micro-thorn and convex hull coupled structured surface were mainly concentrated on the edge of convex hull and micro-thorn that faced the coming direction of particle flow. The geometric structure of the convex hull had beneficial effects on changing the movement behavior of particles, which means the stream of particle flow could be altered from a sliding to rolling state. Consequently, the ploughing and cutting phenomena of particles that act on the surfaces were greatly mitigated. Moreover, after being coupled with micro-thorns, the anti-abrasive wear preparty of the bionic convex hull geometrical structured surface was further improved. The rebound angle of particle flow that contacted the bionic micro-thorn coupled convex hull structured surface was greater than that of the conventional convex hull surface. Therefore, the dispersion effect of particle flow was further enhanced, since the movement behavior of the subsequent impact particle flow was altered. As a result, the wear of the bionic non-smooth surface was further reduced. This biconically inspired novel micro-thorn and convex hull coupled structured surface could provide theatrical and technical references to enhance the wear resistance performance of the soil-engaging component of agricultural machinery and mitigate the problem of abrasive wear failure.

Study of dry sliding friction and wear behavior of bionic surface of hardened steel

Study on Fatigue Characteristics of Bionic Functional Surface of Hardened Steel

Friction and wear behaviour of steel with bionic non-smooth surfaces during sliding

Study on Friction and Wear Performance of Bionic Coupling Surface Moving Pair of 45 Steel

Experiment on the wear-resistance characteristics of bionic through-hole surface samples

The Influence of Pits on the Tribological Behavior of Grey Cast Iron under Dry Sliding

Friction performance of bionic non-smooth surfaces with mixing lubrication

Wear Behavior of Medium Carbon Steel with Biomimetic Surface under Starved Lubricated Conditions

Sliding Resistance of Plates with Bionic Bumpy Surface Against Soil

Experiment Research on Wear Mechanism with Bionic Non-Smoothed Surface

Wear Behavior Of Medium-Carbon Steel With Different Laser-Textured Densities Under Starved Lubrication

Experimental Investigation On Anti-Wear Of A Bionic Non-Smooth Surface Made By Laser Texturing

EDEM Investigation and Experimental Evaluation of Abrasive Wear Resistance Performance of Bionic Micro-Thorn and Convex Hull Geometrically Coupled Structured Surface

Study on laser prepared reinforcement unit distribution of large scale non-uniform hardness surface of gray cast iron against wear

Wear Behavior of Die Steel with Non-smooth Surface in Different Shape and Distance

Experimental Investigation on Anti-wear of ABionic Non-smooth Surface Made by LaserTexturing

Bio-inspired Wearable Characteristic Surface: Wear Behavior of Cast Iron with Biomimetic Units Processed by Laser

Wear Behavior of Fe-Cr-B Alloys under Dry Sliding Condition

Experiment on Wear Resistance of 55 Steel Bionic Non-smoothed Surfaces at High Temperature

An Efficient Bionic Anti-Erosion Functional Surface Inspired by Desert Scorpion Carapace

Investigation of Micro-wear and Micro-friction properties for bionic non-smooth concave components