Abstract:In the high-temperature mainstream of gas turbines, there is a rim clearance between the rotor and the stator. A rim seal is to prevent the intrusion of high-temperature gas by spraying cool fluid from the inside of the rim clearance to the outside. In the past research on rim seals, the focus was on the overall performance of the sealing structure, and the flow in the disc cavity was studied more, but the high-radius flow was simplified. In recent years, additional research in the field has focused on more complex sealing structures and high-radius flows, such as the interface between the disk cavity and the mainstream. There is more work to be conducted in this area of research. In this paper, the unsteady numerical simulation of the flow in four different rim sealing geometries is carried out by the URANS method. The flow phenomena and the influence of geometry on the flow are studied. The numerical simulation results are validated with the experimental results. It is found that the fluid in the rim sealing obviously presents two distinct forms and confrontations according to the tangential velocity. The flow in the sealing structure presents obvious circumferential non-uniformity. Compared with the single-axial structure, in the single-radial structure, the mixing area is induced by the radial geometry, and more vortex structures are generated, the mixing process is more intense, and the sealing effect is better. In the double-sealing structure, the inner structure plays the role of a barrier, and the cavity geometry between the two layers has a major influence on the sealing performance.

Study on Main Structure Parameters of Large-diameter Double-cone Seal

Digital Simulation for Seal Process of Double-cone Ring in Large-sized Ammonia Converter

Effect of T-groove Parameters on Steady-State Characteristics of Cylindrical Gas Seal

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Research on Radial Gap of Double-cone Structure in High Pressure Vessel

Sealing Performance Analysis of Deep-Sea Sediment Sampler

Structure Design of Magnetic Fluid Static Seal at Large Diameter Flange

Design and experimental study on full-metal sealing structure of mandrel-type casing hanger

The Non- Linear Contact Finite Element Analysis of Seal Structure on Large Scale Cutting Tube Machine

Research on a Large Diameter Magnetic Fluid Seal with Thin-Wall Parts

Analysis and Optimization of Structure Parameters of Hydrostatic Mechanical Seal

Effects of main structural parameters on seal performance of a new double spiral groove face seal

Simulation and Experiments on Sealing and Extrusion Failure on Application of Deep-Sea Adsorption by Differential Pressure

A Study of the Sealing Performance of a New High-Pressure Cone Valve for Deep-Sea Gas-Tight Water Samplers

Finite element analysis and structural optimization of V-shaped seal ring based on ANSYS Workbench

Experimental investigation on large clearance shaft seal for gas-liquid mixtures

Research on Key Factors of Sealing Performance of Combined Sealing Ring

Numerical Research on Flow Characteristics at High Radii of Rim Seals with Different Geometric Structures

Design method and research of high temperature gas floating ring seal with slightly variable gap

Structural Analysis and Experimental Study on the Spherical Seal of a Subsea Connector Based on a Non-Standard O-Ring Seal