Abstract:Laminated plates are often modeled with infinite dimensions in terms of the so-called Whitney–Nuismer (WN) stress criteria, which form a theoretical basis for predicting the residual properties of open-hole structures. Based upon the WN stress criteria, this study derived a new formulation involving finite width; the effects of notch shape and size on the applicability of new formulae and the tensile properties of carbon-fiber-reinforced plastic (CFRP) laminates were investigated via experimental and theoretical analyses. The specimens were prepared by using laminates reinforced by plain woven carbon fiber fabrics and machined with or without an open circular hole or a straight notch. Standard tensile tests were performed and measured using the digital image correlation (DIC) technique, aiming to characterize the full-field surface strain. Continuum damage mechanics (CDMs)-based finite element models were developed to predict the stress concentration factors and failure processes of notched specimens. The characteristic distances in the stress criterion models were calibrated using the experimental results of un-notched and notched specimens, such that the failure of carbon fiber laminates with or without straight notches could be analytically predicted. The experimental results demonstrated well the effectiveness of the present formulations. The new formula provides an effective approach to implementing a finite-width stress criterion for evaluating the tensile properties of notched fiber-reinforced laminates. In addition, the notch size has a great effect on strength prediction while the fiber direction has a great influence on the fracture mode.

Compressive Buckling Failure Of Laminates With A Surface Notch

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Failure prediction of an open-hole laminate under compression

Mechanical response and critical failure mechanism characterization of notched carbon fiber reinforced polymer laminate subjected to tensile loading

A Simply Analytic Study of Buckled Thin Films on Compliant Substrates

Buckling of a Stiff Thin Film on a Compliant Substrate in Large Deformation

Experimental Study on Compression Failure of Composite Laminates with Prefabricated Surface Cracks

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

A Study on the Multi-axial Fatigue Failure Behavior of Notched Composite Laminates

Notch insensitivity in fatigue failure of chopped carbon fiber chip-reinforced composites using experimental and computational analysis

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Failure Criteria for Brittle Notched Specimens

The competition between buckling and overstress failure of composite laminated plates in compression and shear loads

A New Stress-Based Formulation for Modeling Notched Fiber-Reinforced Laminates

Buckling and Post-Buckling of A Stiff Film Resting on an Elastic Graded Substrate

Elastic instabilities of soft laminates with stiffening behavior

Buckling and Postbuckling of Stiff Lamellae in a Compliant Matrix

Shear Buckling Mode and Failure of Flat Fiber- Reinforced Specimens in the Axial Compression 2. Numerical Method, Experimental and Numerical Investigations of the Specimens with a [0]s Layup

Characterizing and predicting the tensile mechanical behavior and failure mechanisms of notched FMLs—Combined with DIC and numerical techniques

Post-Buckling Response of Carbon/Epoxy Laminates with Delamination under Quasi-Static Compression: Experiments and Numerical Simulations