Abstract:Hydrogen, as a cheap, clean, and cost-effective secondary energy source, performs an essential role in optimizing today's energy structure. Magnesium hydride (MgH2 ) represents an attractive hydrogen carrier for storage and transportation, however, the kinetic behavior and operating temperature remain undesirable. In this work, a dual-phase multi-site alloy (MsA) anchored on carbon substrates was designed, and its superior catalytic effects on the hydrogen storage properties of MgH2 were reported. Mechanism analysis identified that multi-site FeNi3 /NiCu nanoalloys synergistically served as intrinsic drivers for the striking de/hydrogenation performance of the MgH2 -MsA systems. Concretely, the unique multi-metallic site structure attached to the surface of MgH2 provided substantial reversible channels and accessible active sites conducive to the adsorption, activation, and nucleation of H atoms. In addition, the coupling system formed by FeNi3 and NiCu dual-phase alloys further enhanced the reactivity between Mg/MgH2 and H atoms. Hence, the onset dehydrogenation temperature of MgH2 + 5 wt% MsA was reduced to 195 degrees C and the hydrogen desorption apparent activation energy was reduced to 83.6 kJ/mol. 5.08 wt% H2 could be released at 250 degrees C in 20 min, reaching a high dehydrogenation rate of 0.254 wt% H2 /min, yet that for MgH2 at a higher temperature of 335 degrees C was only 0.145 wt% H2 /min. Then, the dehydrogenated MgH2 -MsA sample could absorb hydrogen from room temperature (30 degrees C) and charge 3.93 wt% H2 at 100 degrees C within 20 min under 3.0 MPa H2 pressure. Benefiting from carbon substrates, the 5 wt% MsA doped-MgH2 could still maintain 6.36 wt% hydrogen capacity after 20 cycles. In conclusion, this work provides experimental rationale and new insights for the design of efficient catalysts for magnesium-based solid-state hydrogen storage materials. (c) 2024 Published by Elsevier B.V. on behalf of Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences.

High Active Hydrogen Storage Alloy Mg2NiH4 and Mg2Ni Synthesized at Temperatures Lower Than 733 K

High active hydrogen storage alloy Mg2NiH4 and Mg2Ni synthesized at temperatures lower than 733 K

High Active Hydrogen Storage Alloy Mg<sub>2</sub>NiH<sub>4</sub> and Mg<sub>2</sub>Ni Synthesized at Temperatures Lower than 733 K

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Hydrogen storage properties of Mg-23.3wt.%Ni eutectic alloy prepared via hydriding combustion synthesis followed by mechanical milling

Improving MgH2 formation kinetics and its effect on NaBH4 synthesis

Magnesium-nickel Hydrogen Storage Alloys Prepared by Hydriding Combustion Synthesis Followed by Mechanical Milling

Achieving Superior Hydrogen Storage Properties Via In-Situ Formed Nanostructures: A High-Capacity Mg–Ni Alloy with La Microalloying

The hydrogen storage behavior of Mg3La and Mg3LaNi0.1

Hydriding Characteristics of Mg2ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydrogen Storage Properties and Mechanisms of Magnesium Based Alloys with Mesoporous Surface

A Strategy of Fabricating Efficient Mg2Ni Nano-Catalysts in Mg-Ni-Ag Fibers and Their Excellent Hydrogen Storage Properties at Near-Room Temperatures

In-situ Precipitation of Ultrafine Mg2Ni Particles in Mg-Ni-Ag Metal Fibers and Their Hydrogen Storage Properties

Dual Tuning of the De-/Hydrogenation Thermodynamics and Kinetics of the Mg-Ni Alloy by Introducing the Ag-H Bond: Enhanced Hydrogen Storage Properties at Moderate Temperatures

Effect of Ni on Mg Based Hydrogen Storage Alloy Mg3Nd

Hydrogen Storage in Mg-Ni-Type Alloys with La and Sm Incorporation

Study on the Microstructure and the Electrochemical Properties of Ml0.7Mg0.2Ni2.8Co0.6 Hydrogen Storage Alloy

Construction of Carbon Covered Mg2NiH4 Nanocrystalline for Hydrogen Storage

Efficient Catalysis of FeNiCu-based Multi-Site Alloys on Magnesium-Hydride for Solid-State Hydrogen Storage

Preparation and hydrogen storage properties of nanostructured Mg2Cu alloy