Abstract:This chapter builds on the work of Zhang and Wang (2012) to present the formulation of a unique model that (1) achieves the simulation of post-liquefaction shear deformation based on its physics, allowing the unified description of pre- and post-liquefaction behaviour of sand; (2) directly links the cyclic mobility of sand with reversible and irreversible dilatancy, enabling the unified description of monotonic and cyclic loading; (3) introduces critical state soil mechanics concepts to achieve unified modelling of sand under different states. Modelling of large post-liquefaction shear deformation is achieved based on the physics proposed by Zhang and Wang. The proposed model is able to appropriately describe some important features of sand, including dilatancy during loading and unloading, and softening of dense sand. The model is first described in triaxial stress space, and then generalized into multiaxial stress space with three dimensional mapping rules for the calculation of plasticity and dilatancy. The determination of the model parameters is described. The cutting-plane stress integration scheme and the Pegasus procedure for the three dimensional implementation of the model into the finite-element framework OpenSees (McKenna and Fenves 2001) are presented in detail. The OpenSees platform is chosen for its great capabilities in geotechnical earthquake engineering simulation and most importantly for the model to be openly available to the technical community. Finally, the performance of the model and its three dimensional implementation is evaluated by simulations of classical drained and undrained triaxial experiments on Toyoura sand by Verdugo and Ishihara (1996) and undrained cyclic torsional experiments on Toyoura sand. Simulations of the VELACS centrifuge shaking table tests are also carried out.

Non-Coaxial Constitutive Modeling of Sands Based on Critical State Model

Non-coaxial hypoplastic model for sand with evolving fabric anisotropy including non-proportional loading

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Three-dimensional Discrete Element Simulation of the Triaxial Cyclic Loading of Sandstone Based on a Nonlinear Parallel-Bonded Stress Corrosion Model

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

AN ELASTOPLASTIC CONSTITUTIVE MODEL OF SANDS CONSIDERING CYCLIC ROTATION OF PRINCIPAL STRESS AXES

Effect Of Non-Coaxiality On Dilatancy Of Sand Involving Principal Stress Axes Rotation

A thermodynamic critical state model for sands

Three-dimensional multi-mechanism bounding surface model for sands

A Unified Plasticity Model for Large Post-Liquefaction Shear Deformation of Sand

Three‐dimensional Anisotropic Plasticity Model for Sand Subjected to Principal Stress Value Change and Axes Rotation

The mechanisms of non-coaxial deformation for anisotropic sand under fixed principal stress axes shearing

Coulomb-Cam Model for Dilatancy and Work-Softening of Sand

Calibration and validation of a sand model considering the effects of wave-induced principal stress axes rotation

Constitutive Model for Sand Considering the Variation of Its Physical State

An elastic–viscoplastic constitutive model incorporating shear dilation characteristic

A Unified Plasticity Model for Large Post-Liquefaction Shear Deformation of Sand and Its Numerical Implementation

Constitutive modeling of principal stress rotation associated with sand under simple shear loading