Abstract:The prominent performance of wave elimination and energy absorption makes calcareous sand important and useful in infrastructure construction and protection engineering. Due to the high compressibility induced by remarkable intragranular void and irregular shape, calcareous sand presents different mechanical behaviors from common terrestrial sands. Considerable efforts have been made to explore the static and dynamic mechanical properties of calcareous sand. In this paper, a series of monotonous experiments have been performed on calcareous sand utilizing the electrohydraulic servo-controlled test apparatus designed by the Global Digital Systems Ltd (GDS). The effects of confining pressure and relative density on the mechanical properties of dry, drained, and undrained saturated sand were studied, and the underlying micromechanism of deformation and failure was discussed. It can be found that the residual stress of dry calcareous sand is independent of the relative density, while the peak stress and residual stress of drainage saturated sand have a positive correlation with the relative density. The increase of confining pressure makes the strain softening more remarkable and heightens the peak stress and residual stress. The stress-strain curve of calcareous sand can be divided into two portions: prepeak portion and postpeak softening portion. For the dry sand and drainage saturated sand, the softened part can be partitioned into three phases, i.e., accelerated phase, steady phase, and degradation phase, while the undrained saturated sand tends to hyperbolic softening. A mathematical model composed of a hyperbolic function and an inverted S-shaped function was formulated to describe the multiphase characteristic, in which the setting of parameter p expands its applicability. The experimental result validated the model, showing that the model can better describe the monotonic stress-strain relationship of calcareous sand. Besides, the physical meanings of model parameters were discussed.

Calibration and validation of a sand model considering the effects of wave-induced principal stress axes rotation

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Non-coaxial hypoplastic model for sand with evolving fabric anisotropy including non-proportional loading

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

Modified Duncan-Chang model considering disturbance

AN ELASTOPLASTIC MODEL FOR SAND CONSIDERING DISTURBANCE

Three‐dimensional Anisotropic Plasticity Model for Sand Subjected to Principal Stress Value Change and Axes Rotation

Micromechanics-based multimechanism bounding surface model for sands

Effect Of Non-Coaxiality On Dilatancy Of Sand Involving Principal Stress Axes Rotation

SANISAND‐FN: An evolving fabric‐based sand model accounting for stress principal axes rotation

AN ELASTOPLASTIC CONSTITUTIVE MODEL OF SANDS CONSIDERING CYCLIC ROTATION OF PRINCIPAL STRESS AXES

Experimental and Mathematical Modeling of Monotonic Behavior of Calcareous Sand

Small Strain Path-Dependent Stiffness of Toyoura Sand: Laboratory Measurement and Numerical Implementation

Three-dimensional multi-mechanism bounding surface model for sands

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

Experimental study on the influence of principal stress axes rotation on sand mechanical behavior and non-coaxiality effects

A refined deviatoric hardening plastic model for sand

A Unified Plasticity Model for Large Post-Liquefaction Shear Deformation of Sand