Abstract:Numerical analyses have been widely used to investigate the stability of deep excavations. The results of this type of analyses rely on the constitutive model that is adopted for the analyses. Although many advanced constitutive models have been developed for the simulation of soil behavior, they are often complex, expensive to use, and not well understood by practicing engineers. Hence, simple constitutive models, such as the Mohr–Coulomb model, are widely used in geotechnical engineering practice. However, these simple models, fail to represent some key features of soil behavior. Of particular importance in granular soils is the effect of changes in soil density on the soil behavior, an aspect that is often overlooked when simple constitutive models are used. In this study, a series of triaxial tests will be conducted on reconstructed gravelly sand to investigate the effect of the relative density and confining pressure on strength and stiffness characteristics of the soil. According to the test results, variations of the soil stiffness and peak deviatoric stress with relative density and confining pressure will be established. A novel disturbance function will then be proposed based on the disturbance state concept to capture the effect of soil density on its behavior. Subsequently, a constitutive model that is based on the original Duncan and Chang model will be developed that considers the effects of the confining pressure and relative density of the soil using the proposed disturbance function. The model is implemented in ABAQUS software and is verified by comparing the numerical results with experimental data. The application of the model is presented through the simulation of a deep supported excavation. The numerical results show that the model successfully simulates horizontal displacements of the support piles, with errors of <5% for the monitoring points. In particular, it is highlighted that the model is superior to the widely used Mohr–Coulomb model in the simulation of excavation problems, and yielded a safer design than that obtained using the Mohr–Coulomb model.

Modified Duncan-Chang model considering disturbance

AN ELASTOPLASTIC MODEL FOR SAND CONSIDERING DISTURBANCE

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

Modified Duncan-Chang Model Considering Physical Properties of Saturated Clays

Analytical Prediction for Tunnelling-Induced Ground Movements in Sands Considering Disturbance

Application of disturbed state concept in calculation of earth pressure

Experimental Investigation on the Behavior of Iron Powder-Reinforced Sand under Electromagnetic Field

Theory of Earth Pressure Against Rigid Retaining Wall Based on Disturbed State Concept Model

Influence of disturbance degree on the propped excavation stability in sandy soil in Shenyang, China

Study on the mechanical characteristics of sand pebble surrounding rock considering the disturbance effect of tunnel excavation

Experimental study on HS-small model parameters of soil considering disturbance and its application in foundation pit engineering

Modified Duncan-Chang Constitutive Model for Modeling Supported Excavations in Granular Soils

Small Strain Path-Dependent Stiffness of Toyoura Sand: Laboratory Measurement and Numerical Implementation

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

Application of Improved Duncan-Chang Model to Stress-deformation Analysis of Dam

STUDY ON DYNAMIC PROPERTIES OF SAND BASED ON DISTURBED STATE CONCEPT

Calibration and validation of a sand model considering the effects of wave-induced principal stress axes rotation

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

Constitutive Model for Sand Considering the Variation of Its Physical State

Coulomb-Cam Model for Dilatancy and Work-Softening of Sand

EXPERIMENTAL STUDY OF INSTABILITY OF LOOSE SAND