Abstract:The prominent performance of wave elimination and energy absorption makes calcareous sand important and useful in infrastructure construction and protection engineering. Due to the high compressibility induced by remarkable intragranular void and irregular shape, calcareous sand presents different mechanical behaviors from common terrestrial sands. Considerable efforts have been made to explore the static and dynamic mechanical properties of calcareous sand. In this paper, a series of monotonous experiments have been performed on calcareous sand utilizing the electrohydraulic servo-controlled test apparatus designed by the Global Digital Systems Ltd (GDS). The effects of confining pressure and relative density on the mechanical properties of dry, drained, and undrained saturated sand were studied, and the underlying micromechanism of deformation and failure was discussed. It can be found that the residual stress of dry calcareous sand is independent of the relative density, while the peak stress and residual stress of drainage saturated sand have a positive correlation with the relative density. The increase of confining pressure makes the strain softening more remarkable and heightens the peak stress and residual stress. The stress-strain curve of calcareous sand can be divided into two portions: prepeak portion and postpeak softening portion. For the dry sand and drainage saturated sand, the softened part can be partitioned into three phases, i.e., accelerated phase, steady phase, and degradation phase, while the undrained saturated sand tends to hyperbolic softening. A mathematical model composed of a hyperbolic function and an inverted S-shaped function was formulated to describe the multiphase characteristic, in which the setting of parameter p expands its applicability. The experimental result validated the model, showing that the model can better describe the monotonic stress-strain relationship of calcareous sand. Besides, the physical meanings of model parameters were discussed.

STUDY ON DYNAMIC PROPERTIES OF SAND BASED ON DISTURBED STATE CONCEPT

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Modified Duncan-Chang model considering disturbance

AN ELASTOPLASTIC MODEL FOR SAND CONSIDERING DISTURBANCE

Experiment of initial relative density effects on sand strength

EXPERIMENTAL STUDY OF INSTABILITY OF LOOSE SAND

RESEARCH OF DYNAMIC PROPERTIES CHANGES AND MICROSCOPIC MECHANISM OF AGEING SAND

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

Experimental Study on Dynamic Characteristics of Saturated Remolded Soft Clay with Sand Particles

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Undrained Cyclic Response and Resistance of Saturated Calcareous Sand considering Initial Static Shear Effect

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Micro-mechanical analysis of the effects of stress cycles on the dynamic and static mechanical properties of sandstone

Comparison of Dnamic Properties of Saturated Sand under Unidirectional and Two-directional Cyclic Triaxial Tests Conditions

Laboratory Study on Dynamic Properties of Silt and Silty Sand

Stress-strain Response of Saturated Sand During Cyclic Water Absorption Shearing

Experimental and Mathematical Modeling of Monotonic Behavior of Calcareous Sand