Abstract:The superior performance of machining large parts with the free-form surface is demonstrated by a five-axis gantry machine tool composed of a gantry mainframe and a milling head. A turntable is used to adjust the position of the workpiece rather than a linear guideway when machining impellers or integral turbines. Furthermore, collisions between adjacent blades are almost unavoidable in the machining region, which is relatively narrow for milling heads. The majority of existing methods attempt to solve the problem by changing the tool's tilt angle. However, when an end-mill cutter is employed, this method will deteriorate surface quality and reduce efficiency. On the condition that the milling head has three rotary axes (TRA), a novel NC code generation method with a fixed tool orientation vector for narrow space surfaces is proposed in this paper. When the geometrical model, considered a supplementary condition, is combined with the kinematics model, an inverse kinematics solution to a general multi-axis gantry machine tool with a TRA milling head is obtained. The problem of multi-axis coupling in the inverse kinematics model is solved by combining the iteration method and geometrical model. In the narrow space for a milling head, the redundant degree of freedom, provided by a machine tool equipped with a TRA milling head, enables adjusting the posture of the milling head without changing the tool orientation vector. Feature points are extracted by preprocessing points selected from machined parts and the TRA milling head to choose the feasible posture and simulate the machining process. Collisions in the narrow space are successfully avoided throughout the cutting process. The NC code generation method is verified on CAM software and cut experiments, proven effective in this paper.

Research on an Algorithm for an NC Machining Hypoid Pinion

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Design Method and Numerical Control Machining Principle for an Arbitrary N-Polygon Noncircular Section

A New Algorithm for Pitch Parameters of Hypoid Gear Drive

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Key Technologies Research For Impellers Machining Based On Nx

Research on Numerical Control Machining Method of Helicoid

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Approach optimizing tool paths arrangement based on genetic algorithm

Design Of Pinion Machine Tool-Settings For Spiral Bevel Gears By Controlling Contact Path And Transmission Errors

NC Codes Optimization for Geometric Error Compensation of Five-Axis Machine Tools with One Novel Mathematical Model

Computerized approach for design and generation of face-milled non-generated hypoid gears with low shaft angle

Instructions About 2-axis NC Machining of Ball-end Milling Cutters

Integrated mathematical approach for design and manufacturing of power-skiving tool for interference-free involute internal gear cutting

A novel collision-free NC code generation method with fixed tool orientation vector using the geometric decoupling strategy based on the three rotary axes milling head

A dimension-driven adaptive programming for tool-path planning and post-processing in 5-axis form milling of hyperboloidal-type normal circular-arc gears

Development of CNC System for Machining of Grooves in Automobile Synchronization Regulators Sleeve

Pinion development of face-milled spiral bevel and hypoid gears based on contact attributes

Positioning Algorithm of Ringlike Cutter Multi-point Contact Machining

A New Compensation Method for Multi-Choice of a Five-Axis Machine with a Tilting Head

Inverse kinematics for a novel hybrid parallel–serial five-axis machine tool