Abstract:Entire tooth surface precise modeling and systematic analysis method for face-gear drives with an involute helical pinion are investigated. A modified imaginary shaper is mathematically modeled as the geometric design tool. The entire tooth surface of the face gear is determined analytically as the envelope to the family of imaginary shaper tooth surface. A practical method to determine the minimum and maximum radii of the face gear is developed. Addendum modification of the face gear is implemented mathematically based on the modified imaginary shaper to improve face-gear tooth-top thickness. Conical modification of the pinion is proposed to avoid contact between face-gear tooth-root fillet and the pinion tooth. Transverse pressure angle modification of the pinion is also proposed to avoid edge contact arising at inner-end and outer-end edges of face-gear tooth. Finite element models with nine pairs of teeth are employed for 3D contact finite element analysis to investigate the basic characteristics of face-gear drives, including meshing and tooth contact analysis, contact and bending stress analysis, contact ratio, transmission error, mesh stiffness, and sensitivity test. The helical face-gear drive is sensitive to rotation direction and shaft angle error. The presented geometric design method is illustrated and validated by numerical examples and trial manufacture.

A New Algorithm for Pitch Parameters of Hypoid Gear Drive

Computerized approach for design and generation of face-milled non-generated hypoid gears with low shaft angle

Quasi-static Tooth Contact Analysis of Hypoid Gear Drive with Coaxiality Deviations

A method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears

Computerized determination of the qualified region of main design parameters of face-milled hypoid gears with low shaft angle

Computational Optimization of the Basic Data and Tooth Form Parameters Based on the Contact Strength for Hypoid Gear

Pitch Cone Design and Avoidance of Contact Envelope and Tooth Undercutting for Conical Worm Gear Drives

Geometric design and analysis of face-gear drive with involute helical pinion

Geometric parameter design and contact characteristics of beveloid gear and involute cylindrical gear transmission with crossed axes

Nonlinear correction of hypoid gear machine tool parameters by duplex helical method

Active tooth surface design of cycloid hypoid gears

An exact system of generation for face-milled hypoid gears with uniform depth taper: Application to hypoid gear drives with high gear ratio

Optimization of the Loaded Contact Pattern of Spiral Bevel and Hypoid Gears Based on a Kriging Model

One Approach to the Synthesis, Design and Manufacture of Hyperboloid Gear Sets With Face Mating Gears. Part 1: Basic Theoretical and Cad Experience

Analysis of Hypoid Gear Time-varying Mesh Characteristics Based on the Finite Element Method

CURVATURE ANALYSIS AND SYNTHESIS OF SKEW GEAR SETS WITH KINEMATIC PARAMETRIC MODELS

Hybrid Dynamic Modeling and Analysis of High-Speed Thin-Rimmed Gears

An Improved Algorithm for Tooth Contact Analysis for Hypoid Gear Based on Axial Section Programming

Optimization of machine tool settings for Spirac hypoid gears by controlling symmetry of contact paths

A new closed-form calculation of envelope surface for modeling face gears

Multi-objective optimization of the manufacture of face-milled hypoid gears on numerical controlled machine tool