Abstract:The application of dedicated cutting tools with complex geometric structures in the orbital drilling process has promoted the rapid development of this new technology within the aircraft industry. Based on the orbital drilling kinematics, the complex machining path generated by the tool, combined with the large number of non-uniform and irregular chips formed under the varying cutting conditions, makes it a challenge to model the cutting force for the orbital drilling operation. This paper proposes the steady machining stage in orbital drilling as a representation of the whole machining process. During the chip formation period at this stage, the undeformed chip geometries produced by each tooth are analyzed and described. The undeformed chip thickness and the width of cut are then calculated. Based on these instantaneous chip geometries, a non-linear cutting force model for the orbital drilling process can then be developed. This experimental study on the orbital drilling process is conducted using a TC4 alloy, with the aim of calibrating the special cutting force coefficients using the average cutting force method, and further validating the cutting force model. The results show that this model can be used to predict the cutting force generated in the half rotational period in the steady cutting stage of the orbital drilling process. Furthermore, it can be used to guide the optimization of machining parameters and the structural design of the dedicated cutting tool by analyzing the relationship between the predicted cutting forces and the feed rate, with the aim of improving the final quality of the borehole.

Positioning Algorithm of Ringlike Cutter Multi-point Contact Machining

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Design Method and Numerical Control Machining Principle for an Arbitrary N-Polygon Noncircular Section

Collisionless Tool Orientation Smoothing above Blade Stream Surface Using NURBS Envelope

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

Tool positioning in five-axis machining on a tensor product surface using circular rays

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Tool Orientation Optimization for Disk Milling Process Based on Torque Balance Method

Non-singular tool path planning by translating tool orientations in C-space

Multi-point Location/support Algorithm Used in Flexible Tooling System for Aircraft Large-Scale Thin-Wall Workpiece

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

An accurate surface error optimization for five-axis machining of freeform surfaces

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Isoscallop of Self-Adaptive Tool Orientation with Toroidal Cutter under Optimum Orientation of MCPs

Generation of Cutter Location Data and Post-Processing for Parallel Kinematic Machine Tools

Constant Scallop Height Algorithm of Self-Adaptive Tool Orientation with Toroidal Cutter

Collision-free Tool Motion Planning for 5-Axis CNC Machining with Toroidal Cutters

A Computer Aided Tool Selection System For 3d Die/Mould-Cavity Nc Machining Using Both A Heuristic And Analytical Approach