Abstract:To meet the high requirement on cutter stiffness in five-axis machining of complex parts with deep channels, such as an aero-engine blisk, conical ball-end cutter is preferred over the traditional cylindrical cutter as the former can increase the stiffness ten folds or more over the latter of a same size. However, because the shank of conical ball-end cutter is a cone instead of a cylinder, when calculating the feasible space of tool axis (FSTA) for any given center of the ball-end, the line-visibility, which is critically utilized in the case of cylindrical ball-end cutter, is no longer applicable. Currently in practice, the calculation of FSTA for the conical ball-end cutter has to resort to the simplest brute-force approach of checking for collision for every sampled tool axis. This process of exhaustive collision checking is extremely time-consuming and lacks accuracy, as there are typically thousands of center points of ball-end on a five-axis tool path, and for each of them there can be again thousands of sampled tool axes to check for collision, which is itself a very time-consuming task. In this paper, we propose a tracking-based numerical algorithm for constructing FSTA of the conical ball-end cutter amid an obstacle environment defined by freeform surfaces. Our algorithm avoids the time-consuming collision checking by directly tracing out the characteristic curves on the boundary surfaces of obstacles. As a result, it not only tremendously reduces the computing time by only searching around the boundary of FSTA, but also substantially improves the accuracy of the final constructed FSTA as the step size of tracing can be set sufficiently small without increasing much on the computing time. Simulation tests of the proposed algorithm are also reported to validate its time efficiency and accuracy.

Collision-free Tool Motion Planning for 5-Axis CNC Machining with Toroidal Cutters

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Generating Collision-Free Tool Orientations For 5-Axis Nc Machining With A Short Ball-End Cutter

Tool Path Generation Algorithm for Five-axis NC Machining with a Toroidal Cutter

Tool Path Planning Algorithm for Five-Axis NC Machining of Sculptured Surfaces

Collision-free Regions of Tool Posture in Five-Axis Machining of Blisk with a Filleted End Mill

On Initialization of Milling Paths for 5-Axis Flank CNC Machining of Free-Form Surfaces with General Milling Tools

Non-singular tool path planning by translating tool orientations in C-space

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

A Tracking-Based Numerical Algorithm for Efficiently Constructing the Feasible Space of Tool Axis of a Conical Ball-End Cutter in Five-Axis Machining

A Gpu-Based Algorithm For Generating Collision-Free And Orientation-Smooth Five-Axis Finishing Tool Paths Of A Ball-End Cutter

Kinematics constrained five-axis tool path planning for high material removal rate

Interference-Free Tool Path Generation for 5-Axis NC Machining with a Flat-End Cutter

Tool-path planning for free-form surface high-speed high-resolution machining using torus cutter

Max Orientation Coverage: Efficient Path Planning to Avoid Collisions in the CNC Milling of 3D Objects.

Tool orientation planning for five-axis CNC machining of open free-form surfaces

Local Interference Detection and Avoidance in Five-Axis Nc Machining of Sculptured Surfaces

Local Gouge Detection Algorithm for 5-Axis Sculptured Surface Machining Using the Toroidal Cutter