Abstract:The superior performance of machining large parts with the free-form surface is demonstrated by a five-axis gantry machine tool composed of a gantry mainframe and a milling head. A turntable is used to adjust the position of the workpiece rather than a linear guideway when machining impellers or integral turbines. Furthermore, collisions between adjacent blades are almost unavoidable in the machining region, which is relatively narrow for milling heads. The majority of existing methods attempt to solve the problem by changing the tool's tilt angle. However, when an end-mill cutter is employed, this method will deteriorate surface quality and reduce efficiency. On the condition that the milling head has three rotary axes (TRA), a novel NC code generation method with a fixed tool orientation vector for narrow space surfaces is proposed in this paper. When the geometrical model, considered a supplementary condition, is combined with the kinematics model, an inverse kinematics solution to a general multi-axis gantry machine tool with a TRA milling head is obtained. The problem of multi-axis coupling in the inverse kinematics model is solved by combining the iteration method and geometrical model. In the narrow space for a milling head, the redundant degree of freedom, provided by a machine tool equipped with a TRA milling head, enables adjusting the posture of the milling head without changing the tool orientation vector. Feature points are extracted by preprocessing points selected from machined parts and the TRA milling head to choose the feasible posture and simulate the machining process. Collisions in the narrow space are successfully avoided throughout the cutting process. The NC code generation method is verified on CAM software and cut experiments, proven effective in this paper.

Generation of Cutter Location Data and Post-Processing for Parallel Kinematic Machine Tools

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

Workpiece Coordinate System Location for 6-D Parallel Kinematic Machine Tools

Analysis on the Cutter-Orientation Capability of Curved Surface Machining by 6-TPS Parallel Machine Tool

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

A novel collision-free NC code generation method with fixed tool orientation vector using the geometric decoupling strategy based on the three rotary axes milling head

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

NC Codes Optimization for Geometric Error Compensation of Five-Axis Machine Tools with One Novel Mathematical Model

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

Approach optimizing tool paths arrangement based on genetic algorithm

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Inverse kinematics for a novel hybrid parallel–serial five-axis machine tool

Key Technology Research on Development of CATIA Based NC Post-processor for a 5-axis Drilling Machine

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Numerical Control Machining Technique Based on Locating by Software

Development of an open post-processing system for parallel machines based on Lex and Yacc