Abstract:Although there are various methods to measure the modulation transfer function (MTF) of charge-coupled devices (CCD). the interferometric fringe pattern method has advantages over others, such as canted slit sources, bar targets, knife-edge, laser-speckle patterns, random noise pattern, etc. Our interferometric method is relatively simple and versatile: It requires no critical optics and no focusing or precision alignment, the entry array is tested, the contrast ratio of the test pattern is high enough, the spatial frequency of the fringe pattern can vary continuously. Our method generates the formation of a sinusoidal intensity fringe pattern by the interference of two monochromatic plane waves, and straightforward projects it onto the CCD array under test. The construction of the experimental device is based on the Fresnel Double-Mirror structure. A 2.5 mw He-Ne laser with the wavelength of 632.8 nm is used as the light source, the laser beam is spatially filtered by a 10 mu m pinhole and expanded to a diameter of 30 mm, and the resulting wave front is divided by two mirrors, which incline to each other at a small angle, and interfered. One of the mirrors is rotatable to vary the frequency of the pattern. The CCD array is mounted on a stage, which is also rotatable to make that the CCD array takes different angle with the fringe pattern direction, to receive the patterns. With the method we provided, the spatial frequency can be extended to some 2 times the Nyquist frequency of the CCD array to study the aliasing effect. In the Cartesian coordinates, the x- and y- axis MTFs (at angle 0 degrees and 90 degrees) of the CCD array were measured, the other three MTFs (at angle 26.56 degrees, 45 degrees and 63.44 degrees), which nobody has done before, were also tested offering a more comprehensive characterization of the CCD array.

Test Running and Data Analysis on the Dual Mixer Time Difference System at NTSC

Modulation transfer function measurement of charge-coupled devices using frequency-variable fringe patterns

Comparison with TAI of NTSC-F1

A Novel Phasor Measurement Unit with Free Scaled Synchronized Time-mark

High-Resolution Multi-Channel Frequency Standard Comparator Using Digital Frequency Measurement

Investigating The Correlation Between Hydrogen-Maser Clocks In The Same Place

Research on Evaluation Method of Time Transfer Performance Between Ground Stations in Two-Way Satellite Comparison Network

Software System for the Measurement of the DMB-T Digital Signal

Calibration Method of the Time Synchronization Error of Many Data Acquisition Nodes in the Chained System

Analysis of digital timing methods with DRS4 module

Time and frequency synchronization for a novel DTV transmission scheme DMB-T

Mobile terrestrial digital TV measurement system

Design and test for the time module of HXMT

Design of 32-channel TDC Based on Single FPGA for μSR Spectrometer at CSNS

Research on the Technology of Improving the Compatibility of DC Measurement Devices Based on the Operation Experience of Siemens Hardware Solutions

A Measurement Method of the DTMB Modulator

A beam phase and energy measurement system based on direct RF signal IQ under-sampling technology

Time-domain global similarity method for automatic data cleaning for multi-channel measurement systems in magnetic confinement fusion devices

A Low Complexity Timing Synchronization Algorithm for DTMB Standard

Study of time resolution by digital methods with DRS4 system

Key Technologies and Measurements for DTMB-A System