Abstract:Although there are various methods to measure the modulation transfer function (MTF) of charge-coupled devices (CCD). the interferometric fringe pattern method has advantages over others, such as canted slit sources, bar targets, knife-edge, laser-speckle patterns, random noise pattern, etc. Our interferometric method is relatively simple and versatile: It requires no critical optics and no focusing or precision alignment, the entry array is tested, the contrast ratio of the test pattern is high enough, the spatial frequency of the fringe pattern can vary continuously. Our method generates the formation of a sinusoidal intensity fringe pattern by the interference of two monochromatic plane waves, and straightforward projects it onto the CCD array under test. The construction of the experimental device is based on the Fresnel Double-Mirror structure. A 2.5 mw He-Ne laser with the wavelength of 632.8 nm is used as the light source, the laser beam is spatially filtered by a 10 mu m pinhole and expanded to a diameter of 30 mm, and the resulting wave front is divided by two mirrors, which incline to each other at a small angle, and interfered. One of the mirrors is rotatable to vary the frequency of the pattern. The CCD array is mounted on a stage, which is also rotatable to make that the CCD array takes different angle with the fringe pattern direction, to receive the patterns. With the method we provided, the spatial frequency can be extended to some 2 times the Nyquist frequency of the CCD array to study the aliasing effect. In the Cartesian coordinates, the x- and y- axis MTFs (at angle 0 degrees and 90 degrees) of the CCD array were measured, the other three MTFs (at angle 26.56 degrees, 45 degrees and 63.44 degrees), which nobody has done before, were also tested offering a more comprehensive characterization of the CCD array.

Comparison with TAI of NTSC-F1

Modulation transfer function measurement of charge-coupled devices using frequency-variable fringe patterns

Atom Fountains at NTSC

Absolute frequency measurement of the 87Sr optical lattice clock at NTSC using International Atomic Time

Effect of temperature on precision of TWSTFT clock comparison in Chinese Area Positioning System

Remote atomic clock synchronization via satellites and optical fibers

Research on Evaluation Method of Time Transfer Performance Between Ground Stations in Two-Way Satellite Comparison Network

Absolute frequency measurements with a robust, transportable ^{40}Ca^{+} optical clock

Investigating The Correlation Between Hydrogen-Maser Clocks In The Same Place

A relative frequency difference detection method based on TDC

An Accurate Frequency Control Method and Atomic Clock Based on Coherent Population Beating Phenomenon

Absolute Calibration of GPS Time Transfer System at NTSC

1/f noise analysis for FAST H i intensity mapping drift-scan experiment

Performance Comparison of Optical Path Difference Calculation Algorithms for Wavelength Scanning Interferometry

Correlation Measurement of Co-Located Hydrogen Masers Using Fiber-Based Frequency Synchronization Network

The three corner hat measurement of three hydrogen masers in remote locations via fiber based frequency synchronization network

The Time and Frequency Standard System for FAST Receivers

High-Resolution Frequency Measurement of the Ground-State Hyperfine Splitting of Cd-113(+) Ions

High-Resolution Multi-Channel Frequency Standard Comparator Using Digital Frequency Measurement

Improving the Short-Term Frequency Stability of a Magnetic-State-selected Cesium Beam Clock with Optical Detection

Temperature Drift Correction for FPGA-Based Time Measurement Systems