Abstract:This study focuses on applying intelligent modeling methods to different injection molding process parameters, to analyze the influence of temperature distribution and warpage on the actual development of auto locks. It explores the auto locks using computer-aided engineering (CAE) simulation performance analysis and the optimization of process parameters by combining multiple quality characteristics (warpage and average temperature). In this experimental design, combinations were explored for each single objective optimization process parameter, using the Taguchi robust design process, with the L18 (21 × 37) orthogonal table. The control factors were injection time, material temperature, mold temperature, injection pressure, packing pressure, packing time, cooling liquid, and cooling temperature. The warpage and temperature distribution were analysed as performance indices. Then, signal-to-noise ratios (S/N ratios) were calculated. Gray correlation analysis, with normalization of the S/N ratio, was used to obtain the gray correlation coefficient, which was substituted into the fuzzy theory to obtain the multiple performance characteristic index. The maximum multiple performance characteristic index was used to find multiple quality characteristic-optimized process parameters. The optimal injection molding process parameters with single objective are a warpage of 0.783 mm and an average temperature of 235.23 °C. The optimal parameters with multi-objective are a warpage of 0.753 mm and an average temperature of 238.71 °C. The optimal parameters were then used to explore the different cooling designs (original cooling, square cooling, and conformal cooling), considering the effect of the plastics temperature distribution and warpage. The results showed that, based on the design of the different cooling systems, conformal cooling obtained an optimal warpage of 0.661 mm and a temperature of 237.62 °C. Furthermore, the conformal cooling system is smaller than the original cooling system; it reduces the warpage by 12.2%, and the average temperature by 0.46%.

Mould Design Optimization of Typical Part Based on CAE Analysis

Warpage analysis and optimization for auto interior ornaments based on CAE

Optimize the Warpage of Injection Molding of Cover Based on Orthogonal Test

Warpage analysis and optimization of thin-walled injection molding parts based on numerical simulation and orthogonal experiment

Surrogate Model and Improved Genetic Algorithm-Based Warpage Optimization of Injection Molding

OPTIMIZATION OF INJECTION MOLDING PROCESS PARAMETERS BY TAGUCHI DOE TECHNIQUE

Optimization of Plastic Injection Molding Process Parameters by Taguchi Optimization and CAE Technique

Application of Moldflow Analysis to Optimizing Design of Parts with Metal Insert

Optimization Analysis and Design with CAE for Injection Mold of Automobile Instr ument

Warpage control of thin shell parts of injection-molded using taguchi method

Research on Intelligent Control of Thin-Walled Plastic Parts Forming Quality Based on CAE and DOE Technology

The Research on Gate Location Optimization of Injection Molding Based on Warpage

A method combining optimization algorithm and inverse-deformation design for improving the injection quality of box-shaped parts

Warpage Parameter Control Design of Compressor Resign Blade Injection Molding

Design of Front-Covering-shell Stamping Mould on an Auto Engine Based on CAE

CAE analysis-based optimization design of the cooling system for injection mold

Anti-deformation Optimization Method of Mould Cavity for Compressor Resin Blade Based on the Weight

CAE-based Development of Large Scale Injection Mould

Application of Intelligent Modeling Method to Optimize the Multiple Quality Characteristics of the Injection Molding Process of Automobile Lock Parts

Influence of mold design and injection parameters on warpage deformation of thin-walled plastic parts

Application of CAE for mold flow analysis in plastic molding mold design