Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

Investigation on Rheological Properties, Morphology and Mechanical Properties of HDPE-Wood Flour Composites

Impact Response of Bamboo-Plastic Composites with the Properties of Bamboo and Polyvinylchloride (PVC)

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Effect of Polymer Blends on the Properties of Foamed Wood-Polymer Composites

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Morphology, Mechanical Properties and Dimensional Stability of Biomass Particles/High Density Polyethylene Composites: Effect of Species and Composition

Toughening and reinforcing wood flour/polypropylene composites with high molecular weight polyethylene under elongation flow

HDPE Composites Filled with Different Wood Fibers

Mechanical properties and water absorption behavior of injection-molded wood fiber/carbon fiber high-density polyethylene hybrid composites

Thermal, Mechanical and Morphological Behavior of Poly(propylene)/Wood Flour Composites

Effects of Lubricant Content on Extrusion Processing and Mechanical Properties of Wood Flour-High-density Polyethylene Composites

Influence of Glycerol Content on Properties of Wheat Gluten/Hydroxyethyl Cellulose Biocomposites

Study on fluidity and mechanics performance of UHMWPE/HDPE composite material

Effects of processing on mechanical properties of polypropylene composites

Study on the shear viscosity of hdpe-wood composites/supercritical co 2 solution

The study on microstructure and mechanical properties of multi-component composite based on HDPE

High density polyethylene/wood flour composite: Optimization of processing temperature, processing time and coupling agent concentration

Mechanical, thermal and rheological properties of polylactic acid (PLA)/epichlorohydrin modified pine wood flour (EWF) composites

Research on the preparation and properties of foamed PP/wood flour composites

The Influence of Filler Concentrations and Processing Parameters on the Mechanical Properties of Uncompatibilized CS/HDPE Biocomposites