Abstract:As one of the primary methods, the impedance fault location one based on the single-terminal data is widely used. But for easily infected by the operation condition of the opposite system, it is difficult to estimate accurately. Thus this paper puts forward to a novel nonlinear-estimation algorithm using the characteristics of arc. According to the equivalency of the sequence component of harmonic voltage at the fault point, a nonlinear states estimation method is applied to calculate the fault location on the meaning of the minimum mean square optimal root. In order to avoid the assumption of arc current, the algorithm takes the best use of frequency-amplitude character of the transient arc resistance by Mayr model rather than its detail magnitude information. That gives the equivalent model a much nearly approach to the practical system, and reduces the impaction of the operation manner of the opposite side. Therefore the algorithm presents a novel approach and its location precision of all faults specially the far terminal ones may be favor to improve. For the sake of verify the correctness an accurate 500 kV power system network are made up, which applies distributing parameter transmission line model and takes the character of transient arc into account by Mayr arc model. The results of algorithm testing through computer simulation are presented, too. Those prove that the algorithm is viable

Parallel Simulated Annealing Algorithm for One-Terminal Fault Location on Transmission Line

A Nonlinear-Estimation Algorithm of Single-Terminal Arcing Fault Location for Overhead Transmission Lines

A Novel Fault Location Method Suitable for Transmission Line with Multi Branches

A Nonlinear-estimation Algorithm for Single-Terminal Fault Location Based on the Characteristics Ofarc

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

An Accurate Fault Location Algorithm for Parallel Transmission Lines Using One-Terminal Data

Fault Location Scheme for Transimission Line Based on Simulated Annealing and Least Square Algorithm

A Time-domain Fault Location Algorithm Based on One-terminal Current of Parallel Transmission Lines

Single-end Fault Location for High Impedance Arc Grounding Fault in Transmission Line

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

Single-terminal fault location scheme based on the fault transient characteristic of arc for four-parallel transmission lines on the same tower

Fault Location Algorithm for Parallel Transmission Line Based on Tow Termial Data

Parameter Identification Algorithm for Fault Location Based on Distributed Transmission Line Model

Algorithm of Accurate Two-Terminal Fault Location on Power Line

Fault Location Algorithms for Parallel Transmission Lines Using Two Terminals Nonsynchronized Current Data

Fault Location Algorithm Based on Time-frequency-domain with Two Terminals Asynchronous

Parallel Transmission Lines Fault Location Algorithm Based on Differential Component Net

A novel time-domain method for locating faults on parallel transmission lines by two terminals current

A Novel Short Time-Window Method for Locating Fault on Coupled Double-Circuit HV Tranmission Line Using One Terminal Data

Study of fault location for parallel transmissions lines using one terminal current traveling waves

A Fault Location Algorithm for Multi-Section Combined Transmission Lines Considering Unsynchronized Sampling