The system of temperature calibration and controlling based on the fieldbus

CHI Xiang-li,WANG Jun-jie

DOI: https://doi.org/10.3969/j.issn.1671-1041.2006.04.020

2006-01-01

Abstract:Described in the article are the aspects of the PROFIBUS field bus system as well as its application in the experiment system of temperature calibration and controlling. The network structure, soft/hardware configuration and the main function are also elaborated.

What problem does this paper attempt to address?

Survey on Control Research of Networked Control Systems Based of Field Bus

LIU Gui-guo,LIU He,HUANG Dao

DOI: https://doi.org/10.3969/j.issn.1671-9565.2006.01.015

2006-01-01

Abstract:In view of control,the research background and contents on the networked control systems based of field bus are introduced in this paper.Networked control systems is a discipline as the combination of network and control science which covers a wide subjects.First,the three mathematic models of networked control systems are discussed, which consist of short network-induced delay with the controller time or event driven,and long network-induced delay with the controller event driven.Second,the mean value controllability,mean square controllability, mean value observability and mean square observability of networked control systems are analyzed. Third,several methods of controller design under the conditions of networked systems are intrduced.Finally.a further discussion on performance improvement of networked control systems in the furture is proposed.
Design and Realization of Temperature Limiter Measurement and Control System

王恒奎,潘峰,边耐欣,陈子辰

DOI: https://doi.org/10.3969/j.issn.1000-8829.2001.05.011

2001-01-01

Abstract:The development of measurement & control system under Windows is introduced,and the system's function,design of hardware and software are discussed in detail .At the end of this paper, we think it has a wide application prospect in industry.
An Intelligent Greenhouse Control System

Yang Jia-qiang,Yulong Jin,Jian Gao

DOI: https://doi.org/10.11591/telkomnika.v11i8.3088

2013-01-01

TELKOMNIKA Indonesian Journal of Electrical Engineering

Abstract:Because the greenhouse control systems designed in the past are not adaptable in practice, a new greenhouse control system based on RS485 bus is realized in this paper. A new smart sensor block is developed in the system to acquire field environment factor, which can reduce complex routing and increase reliability of the whole system. The model of solar greenhouse is introduced and fuzzy control is adopted in control unit. Besides, a friendly human-computer interface is developed by LabVIEW. The proposed system has been verified by the experiments in the control of medium single-span greenhouses. DOI: http://dx.doi.org/10.11591/telkomnika.v11i8.308 8
Analysis on Mode and Parameter Status of Function Block Application Process in Foundation Fieldbus Based on High Speed Ethernet

刘晨吉,冯冬芹

DOI: https://doi.org/10.3969/j.issn.1000-0682.2004.05.022

2004-01-01

Abstract:The basic architecture and the transition rules of HSE function block mode and parameter status are introduced first in this paper.Then,based on the analysis of typical control strategies in liquid-temperature control system,a concrete transition method of mode and parameter status in function blocks is present in detail.
Measurement and Control System Based on PROFIBUS Field Bus

WANG Xing-hai,WANG Shu-wei,CHEN Jing

DOI: https://doi.org/10.3321/j.issn:1000-7857.2006.08.014

2006-01-01

Abstract:A measurement and control system based on PROFIBUS field bus was designed for TRPO process, with WinPLC7 and KingView 5.0. The experiments were carried out with automation control system and good results were obtained.
Design and implementation of controller for a sensor network protocol

Chunhua Ju,Xin Yuan,Jianguo Xing,WenMin Zhao,Weiwei Zhu,Jing Huang

2007-01-01

Abstract:This paper presents the design and implementation of network controller which based on the Data Link Layer's specification of a lightweight sensor-oriented fieldbus protocol, that is sensor network protocol. The controller is packed with AVALON standard peripheral interface. It can be treated as a normal intellectual property core in project design, so that the operation on it is simplified as reading or writing on register. The test results show that the controller meets the requirements of the specification in the frame identification, arbitration, checking and so on. A follow-up application developing basement can be found easily on this controller.
Applied Fieldbus into Communication Systems in ITS

Min Li,Hui Wang,Ping Li

DOI: https://doi.org/10.3969/j.issn.1002-0268.2001.06.021

2001-01-01

Abstract:After the communication system in ITS is introduced briefly, its hierarchy of the communication system is presented. By analyzing the strong and weak points of standardized fieldbus, a new hierarchy communication system framework is presented in the paper, in which the widely accepted standards of higher layer are kept unchanged while the lower layer taking a new solution based on modified fieldbus. In order to demonstrate the feasibility, a prototype system is introduced.
Development and Application of Experimental Equipment for Fieldbus Control System

Hairong Zheng

2005-01-01

Abstract:This paper introduced the development and application of a fieldbus control experimental system based on EtherNet,ProfiBus and DeviceNet.On the background of the experiment,it described the basic methods of configuring hardware and software and some problems which should be paid attention to in mapping address.
Design and Implementation of Temperature Measuring & Controlling System of Buildings Based on Meter-Bus

WU Lin-gao,ZHAO Jian,CAO Wei

DOI: https://doi.org/10.3969/j.issn.1007-2683.2006.01.009

2006-01-01

Abstract:In order to meet the demands of concentrated management of intellectualization,according to the communication protocol of the M-Bus,the temperature measuring & controlling system of buildings based on meter-bus is designed and implemented.The system adopts the special M-Bus driver and receiver,the TSS721A Transceiver and the ultra-low-power MSP430 series MCU produced by TI Co..The result indicates that this system has features including running steadily,high reliability,meeting user's requests of design,and it can be widely used in the future.
Application of Fieldbus Technology to the Automatical Measurement Experiment Teaching

Ma Xiu

DOI: https://doi.org/10.3969/j.issn.1006-7167.2001.05.014

2001-01-01

Abstract:This paper introduced the application of fieldbus technology to the automatical measurement experiment teaching.
Application of Automatic Control System in Cement Industry Based on Profibus

FENG Yong,ZHANG Qiang,YANG Xu

DOI: https://doi.org/10.3969/j.issn.1004-289X.2008.04.020

2008-01-01

Abstract:It introduces the basic knowledge,characteristics as well as several common techniques of field bus.What is more,it also presents the scenarios of PROFIBUS techniques implemented in cement industry.The implementation of PROFIBUS field bus will economize the amount of hardware and investment,save expenses,improve the reliability,economy and tecnical function of computer monitoring system,and strenghthen productive efficiency.
How to improve control system performance using FF function blocks

Jiming Chen,Zhi Wang,Youxian Sun

DOI: https://doi.org/10.1109/CCA.2002.1038744

2002-01-01

Abstract:An important process control trend is the implementation of digital communication with field control devices. Traditional distributed control systems are being augmented with smart field instruments. Foundation Fieldbus is a digital control network that interlinks such "smart" field instruments like sensors and actuators in a process control environment. In the Foundation Fieldbus all the control algorithms and data acquisition are executed by structures called function blocks. This paper attempts to improve the performance based on these function blocks. First, an introduction to the function blocks of Foundation Fieldbus and their structure and execution process are presented. Then, an example of a fermentation process is described. The structure of the control system and the implementation of distributed control based on function blocks are discussed. Finally, the problems related to system safety with function blocks and their programming language are dealt with.
Brief Introduction to DCS and the Fieldbus Technology

ZHANG Zhen,NIU Yu-gang

DOI: https://doi.org/10.3969/j·issn.1000-3886.2013.01.002

2013-01-01

Abstract:The fieldbus technology is very significant to the industry. First the definition、development and composition of Distributed Control System is briefly introduced in the paper .Then,the present application situation and latest developments of the fieldbus technology are discussed from the aspect of the formation background、conception、feature、advantages and composition. Some types of popular national Fieldbuses such as CAN、LonWorks、FF、HART 、Profibus and the communication protocol 、applied field、real-time and the solution of dealing with the changes in technology and system failure are also introduced.
A Review of the Fieldbus

Tong Weiming,Zhang Dongzhong,Song Junbo

2002-01-01

Abstract:In the article the conception of the fieldbus was completely introduced, the composing of the fieldbus system for the first time and the system structure of the fieldbus control system by several typical examples were shown, the essential technology character of the fieldbus, expatiation on the virtues of the fieldbus were analyzed.
The Development of a Real-time Temperature Control System Based on the Modbus Com-munication Protocol

WEN Xiao-ling,YI Xian-jun,ZHONG Xiao-xia

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.11.042

2008-01-01

Abstract:This paper proposes the design and realization method of the real-time temperature control system based on the Modbus communication protocol with the Visual Basic6.0. The experimental results show that the real-time control required by the equipment can be implemented by use of the developed system.
Design and application of the composite experimental teaching system on temperature measurement and control

Jixuan Liu,Hualing Chen,Xiaodong Zhang,Hongqiang Xu

2004-01-01

Abstract:Aimed to achieve the composite experimental teaching system on temperature measurement and control, software of the system was developed using LabView programming language. Hardware of the system was made. In this paper, some problems of the experiment system were discussed such as the scheme of system design, the hardware component for the temperature measurement and control, and the function of software system, etc. The development and application of the temperature measurement and control experiment system can promote the undergraduate students to master the modern measurement and test technology and to train the practice and innovation ability. So the spread and application of the system has important significance.
Development of Test System of Fuel Cell Engine Thermal Management Experiment Platform

田颖,聂圣芳,张扬军,卢青春

DOI: https://doi.org/10.3969/j.issn.1001-2222.2004.06.012

2004-01-01

Abstract:The test system of fuel cell engine thermal management experiment platform adopts field bus technology, this paperintroduces the hardware construction and software design scheme of test system base on MODBUS, through the system test, it is proved that the test system is capable of the basic function which the fuel cell engine thermal management experiment platform is needed.
Study on Testing System of Automotive Thermal Management Test Bench

田颖,金振华,张扬军,卢青春

DOI: https://doi.org/10.3969/j.issn.1001-2222.2009.02.021

2009-01-01

Abstract:The testing system of automobile thermal management test bench based on PROFIBUS was built and its software system was developed with the LabView virtual instrument development platform and the object-oriented programming method.The results show that the system can run stably and reliably,has the strong anti-interference ability,and is easy to maintain and extend. Accordingly,the test can satisfy the basic function of thermal management test bench.
Control System Based on Fieldbus for the Workshop of Unloading Coal Precipitator

Zi-sheng Zhang,Chao Cui,Qing Hao,Qiang Liu,Ji-guang Wang,Zhi-qiang Liu,Qing Li

DOI: https://doi.org/10.1109/CCIE.2010.154

2010-01-01

Abstract:The fieldbus technology is applied to the auto-control system of the coal unload workshop. The setting-up of the model, the design and the realization of the fieldbus control system are discussed. High-low voltage control systerm structure is analysed. Hardware of fieldbus and communication cards is designed. And the key points of the realization of the system are designated. The prospect of the fieldbus in controlling is also discussed. This technology can be well applied in practicality.

The system of temperature calibration and controlling based on the fieldbus

Survey on Control Research of Networked Control Systems Based of Field Bus

Design and Realization of Temperature Limiter Measurement and Control System

An Intelligent Greenhouse Control System

Analysis on Mode and Parameter Status of Function Block Application Process in Foundation Fieldbus Based on High Speed Ethernet

Measurement and Control System Based on PROFIBUS Field Bus

Design and implementation of controller for a sensor network protocol

Applied Fieldbus into Communication Systems in ITS

Development and Application of Experimental Equipment for Fieldbus Control System

Design and Implementation of Temperature Measuring & Controlling System of Buildings Based on Meter-Bus

Application of Fieldbus Technology to the Automatical Measurement Experiment Teaching

Application of Automatic Control System in Cement Industry Based on Profibus

How to improve control system performance using FF function blocks

Brief Introduction to DCS and the Fieldbus Technology

A Review of the Fieldbus

The Development of a Real-time Temperature Control System Based on the Modbus Com-munication Protocol

Design and application of the composite experimental teaching system on temperature measurement and control

Development of Test System of Fuel Cell Engine Thermal Management Experiment Platform

Study on Testing System of Automotive Thermal Management Test Bench

Control System Based on Fieldbus for the Workshop of Unloading Coal Precipitator