Abstract:Flow boiling is an important heat dissipation method for cooling high heat flux surfaces in many indus-trial applications.The heat transfer can be further enhanced by using porous media surfaces due to their high specific surface areas.However,although flow boiling in channels is well understood,the phase-change behavior with the additional capillary effect induced by the porous structures is not well under-stood,and the design of the porous structures is difficult to avoid dryout and over-temperature accidents.A pore-scale lab-on-a-chip method was used here to investigate the flow boiling heat transfer character-istics inside micro-porous structures.The flow patterns,captured in the two-phase region with a uniform pore-throat size of 30 μm,showed that liquid was trapped in the pore-throat structures as both dispersed liquid bridges and liquid films.Moreover,the liquid film was shown to be moving on the wet solid surface by laser-induced fluorescence and particle tracking.A theoretical analysis showed that the capillary pres-sure difference between adjacent liquid bridges could drive the liquid film flows,which helped maintain the coolant supply in the two-phase region.The pore-throat parameters could be designed to enhance the capillary pressure difference with multiple throat sizes of 10-90 μm which would enhance the heat transfer 5％-10％ with a 5％-23％ pressure drop reduction.This research provides another method for improving the flow boiling heat transfer through the porous structure design besides changing the sur-face wettability.

Flow Boiling Heat-Transfer with Fluidized Solid Particles

FLOW BOILING HEAT TRANSFER IN A NEW VAPOR-LIQUID-SOLID THREE-PHASE CIRCULATING FLUIDIZED BED EVAPORATOR

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Heat Transfer and Pressure Drop of Vapor-Liquid Solid Three-Phase Boiling Flow of Binary Mixtures

Study on boiling heat transfer in liquid saturated particle bed and fluidized bed

Experimental and Numerical Studies on Enhanced Flow Boiling in Tube with Superwetting Micro-Finned Surfaces

Investigation on boiling heat transfer enhancement and anti-scaling process by using solid particles

The Numerical Method for Simulations Gas Solid Fluidization System

The mechanism of the influence of solid particles on the fouling process of pool boiling

An Innovative Method for the Theoretical Investigation on the Critical Heat Flux of Nanofluid Flow Boiling with Nanoparticle Deposition

Experimental Investigations of Two-Phase Boiling Flow in A Complicated Channel

Role of Trapped Liquid in Flow Boiling Inside Micro-Porous Structures: Pore-Scale Visualization and Heat Transfer Enhancement.

Development of a heat transfer model for the film boiling regime in a fouling layer

An investigation on the heat transfer characteristics of nanofluids in flow boiling by molecular dynamics simulations

Performance of a new vapor–liquid–solid three-phase circulating fluidized bed evaporator

Experimental investigation on heat transfer of flow boiling in stacking porous media

Particle-Fluid Heat Transfer In A Circulating Fluidized Bed

Numerical Analysis of Enhanced Flow Boiling Heat Transfer in Vertical Porous Tube

EXPERIMENTAL STUDY ON BOILING FLOW AND HEAT TRANSFER IN PEBBLE BED CHANNELS

Numerical Simulation of Flow Boiling for Organic Fluid with High Saturation Temperature in Vertical Porous Coated Tube

Heat Transfer Model Based on Flow Pattern During Flow Boiling in Rectangular Microchannels