Abstract:3D stitching composites have already sparked great interest among researchers due to their ability to effectively improve the weak inter-laminar properties in composite laminate structures. In this paper, a systematic analysis on mode I fracture and low-velocity impact damage of 3D stitched composites has been demonstrated via a novel multi-scale model which is capable of efficiently characterizing the distribution of stitching threads. The damage modes including intra-laminar cracks, inter-laminar delamination and stitching thread breakage are identified via a combination of continuum damage mechanics (CDM), cohesive zone model (CZM) element and truss element. This novel modeling approach enables an association analysis of stitching thread breakage status and other damage morphologies, promoting an in-depth study for the influence of stitching thread on damage evolution, which has not been reported yet. The introduction of stitching threads effectively suppresses the sharp propagation of delamination after peak load, avoiding the catastrophic destruction during mode I fracture. The mechanism of damage inhibition from stitching threads is well revealed by the numerical simulation. Furthermore, the capability of 3D stitched composites to resist low-velocity impact damage is effectively predicted in terms of peak load, damage area and damage morphology, finding that the increase of stitch density inhibits the propagation of matrix crack, as well as delamination. The universality and the expanding application of the model are also evaluated, demonstrating that it is suitable for various 3D stitched composites.

Experimental study on the stitching reinforcement of composite laminates with a circular hole

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

Experimental Investigation of Interlaminar Fracture Toughness of CFRP Composites with Different Stitching Patterns

Effect of Stitches on the Permeability of Interbundle Channels in Stitched Fabrics

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Experimental and Numerical Analysis of Stitched Composite Laminates Subjected to Low-Velocity Edge-on Impact and Compression after Edge-on Impact

Modelling the needling effect on the stress concentrations of laminated C/C composites

STUDY ON CONSTITUTIVE RELATIONSHIP OF STITCHED LAMINATES(II) --Analytical and Experimental Study on Stiffness of Stitched Laminates

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Multi-scale numerical analysis of damage modes in 3D stitched composites

Finite Element Analysis of Low-Velocity Impact Damage of Stitched Laminates

Study on Stiffness of Stitched Laminates

Influence of Stitch Angle on the Flexural Response of Composite Structures

Enhancement of Composite Open-Hole Tensile Strength Via Fine Z-pins Arrangements

Effects of stitching parameters on the flexural properties of stitched foam core sandwich composites

Experimental and numerical studies of the open hole tensile strength of drilled‐ and molded‐hole unidirectional laminates

Tensile Behavior of Double-Hole CFRP Composite with Different Holes Position

FEM analysis of unit cell using single I-Fiber stitching process

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation