Abstract:Steel corrosion is the major form of failure of durability of concrete structures. The durability monitoring for concrete structure and its repair research are two urgent and necessary tasks, and the former provides the basis for the latter. For concrete durability monitoring, with the development of corrosion processes, environmental factors in the concrete (saturation, temperature, and so on) and the corrosion rate changing will have an effect on steel corrosion polarization dynamics. This paper reviewed some widely used foreign durability monitoring sensors for the reinforced concrete, and discussed the negative and positive aspects of them. Also, this paper introduced some newly developed domestic sensors which may be more suitable used in extra high-humidity and low-humidity environment. For concrete durability restoration, the improvement of technique for reinforced concrete structure durability can be considered from three aspects "prevention", "resistance" and "treatment". As to the "treatment", electrochemical rehabilitation is regarded as the only effective method to stop steel corrosion. This paper reviewed the traditional repair and electrochemical method for the reinforced concrete, and introduced cathodic protection, realkalisation of reinforced concrete, electro-deposition method, electrochemical chloride extraction (ECE) and electro-migration anticorrosion technology. The effect and principle of these method were discussed. Most importantly, this paper put out the concept of bi-directional electro-migration rehabilitation (BIEM), and introduced the principle, research state and technical difficulties of BIEM.

State-of-the-art on Mechanical Property of Corroded Reinforced Concrete Materials

State-of-the-art Review on the Bond Properties of Corroded Reinforcing Steel Bar

Mechanical Performance of Corroded Steel Bars in Concrete

State-of-art of the Mechanical Behaviour of the Corrosion Reinforced Concrete Bridges

State-of-art of corrosion-induced cracking of reinforced concrete structures

Comparison on bond degradation of reinforced recycled and normal concrete

EXPERIMENTAL INVESTIGATION AND DESIGN OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

Effect of Corrosion on Bond Behavior and Bending Strength of Reinforced Concrete Beams

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Test study on bond behavior of corroded steel bars and concrete

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

Applicability Study on Accelerated Corrosion Methods of Steel Bars in Concrete Structure

Shear Performance of Reinforced Concrete Beams with Corroded Stirrups in Chloride Environment

Experimental Study of the Modulus of Steel Corrosion in a Concrete Port

Residual strengths of reinforced concrete beams with heavy deterioration

Study On Modulus Of Rust Applied In Steel Corrosion Induced Concrete Cracking Model

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Research on Resistance of Corroded Reinforced Concrete Members

Study on Mechanical Properties of Steel-Concrete Composite Beam with Corroded Studs Under the Effect of Negative Bending Moment

Performance of Corroded Reinforced Concrete Columns under the Action of Eccentric Loads

THE STATE OF THE ART OF CONCRETE STRUCTURE DURABILITY MONITORING AND RESTORATION