Abstract:The corrosion and scaling phenomenon have crucial impact on drinking water distribution systems (DWDS), which might lead to pipe blockage or leakage, colored water and other chemical stability issues. In this study, a simulating pipe system with continuous water flow was prepared to investigate the characteristics of corrosion and scaling on ductile iron pipe transporting ground water with sodium-hypochlorite (NaOCl) disinfection. Electrochemical assays, such as polarization curves and electrochemical impedance spectra were applied to monitor the corrosion and scaling process. Results showed the morphology and components of scale were closely related with the electrochemical analysis results. The corrosion current density decreased continuously as corrosion and scaling proceeded. The process could be divided into three stages. During Stage I (0-20 days), the corrosion current intensity of low NaOCl dosage experiments (1, 2 mg/L) were higher than those of high NaOCl dosage experiments (5, 10 mg/L). The difference could be explained by different oxidation potentials, pH and CaCO3 deposition. During Stage II (20-80 days), higher proportions of Fe3O4 in scale in experiments with no or low NaOCl dosages restrained the corrosion process and presented smaller corrosion current. Subsequently, the ductile iron surface became passivated and the difference of various NaOCl dosages affecting corrosion and scaling process turned to be negligible during Stage III (80-90 days). A negative linear relationship between the proportion of stable scale component and the corrosion current density was established. Besides the direct corrosion reaction with iron substrate, NaOCl dosing was accompanied by an increase in pH and calcium carbonate precipitation potential values, which affected the early period corrosion and scaling phenomenon greatly. (C) 2020 Elsevier Ltd. All rights reserved.

Effect of Ca2+ and Mg2+ on Corrosion and Scaling of Galvanized Steel Pipe in Simulated Geothermal Water

Scaling and Corrosion of 304 Stainless Steel and Galvanized Steel Pipes in a Simulated Geothermal Water Environment

Corrosion and Scaling of the Galvanized Steel Pipe in Flowing Geothermal Water

Experiment of stainless steel corrosion and scaling in geothermal water supply pipeline

Corrosion and Scaling on Carbon Steel and Galvanized Steel Pipe in Simulated Geothermal Water

Effects of Chloride and Humic Acid on Iron Release in Water Distribution System

Scaling and electrochemical corrosion behavior of 304 stainless steel pipes in a simulated geothermal water environment

The Corrosion Behavior of X100 Pipeline Steel in a Sodium Chloride Solution Containing Magnesium and Calcium

Effect of Ca2+ Concentration on Protection Properties of X65 Steel Corrosion Scale

Physico-chemical Characteristics of Corrosion Scales from Different Pipes in Drinking Water Distribution Systems

Identifying effects of pipe material, hydraulic condition, and water composition on elemental accumulation in pipe corrosion scales

Metal-release Potential from Iron Corrosion Scales under Stagnant and Active Flow, and Varying Water Quality Conditions.

Effects of Varying Temperatures and Alkalinities on the Corrosion and Heavy Metal Release from Low-Lead Galvanized Steel

Effects of chloride on corrosion scale compositions and heavy metal release in drinking water distribution systems

Effect of Biofilm on Cast Iron Pipe Corrosion in Drinking Water Distribution System: Corrosion Scales Characterization and Microbial Community Structure Investigation

Effect of FexCayCO3 and CaCO3 Scales on the CO2 Corrosion of Mild Steel

Manganese Release from Corrosion Products of Cast Iron Pipes in Drinking Water Distribution Systems: Effect of Water Temperature, Ph, Alkalinity, SO42- Concentration and Disinfectants

Characteristics of Iron Corrosion Scales and Water Quality Variations in Drinking Water Distribution Systems of Different Pipe Materials.

Early Period Corrosion and Scaling Characteristics of Ductile Iron Pipe for Ground Water Supply with Sodium Hypochlorite Disinfection.

Anticorrosion and Scale Behaviors of Nanostructured ZrO2–TiO2 Coatings in Simulated Geothermal Water

The Effects of Ca2+ and Mg2+ Ion Concentrations in Brine on Scaling Formation and Morphology on Metal Surfaces