Abstract:Most design and analysis methods widely used for horizontal axis wind turbine performance prediction, such as the PROP code, are based on the traditional 2-D blade element/momentum theory (BEMT) methods, which are inadequate and underpredict the wind turbine rotor power output in the high-wind/peak-power condition, owing to effects of rotation on the wind turbine blade boundary layer. Although the deficiencies of the methods have been known for some time, this area has been neglected. The continued development of viable and well-established stall-regulated wind-turbine technology makes this research topic timely and particularly relevant to reducing the cost of wind energy. The main aim of the present paper is to describe and analyze the fundamental flow phenomena that characterize the boundary layer on rotating blades, and to develop a preliminary stall-delay model that modifies the 2-D airfoil data so as to simulate the 3-D stall-delay effects. The following steps were taken in the development of the model: 1) analysis of the 3-D integral boundarylayer equations for a reference system rotating with the blade, 2) description of the effects of rotor rotation on the separation point and its causes, and 3) determination of a simple correction formula to obtain rotating rotor lift coefficient Ci(a) and drag coefficient Cd(a) data from measured 2-D airfoil data. The preliminary 3-D stall-delay model consists of two key parameters (the ratio of local chord to local radius c/r the ratio of rotation speed to freestream velocity A) and three empirical correction factors Copyright © 1998 by the American Institute of Aeronautics and Astronautics, Inc. and the American Society of Mechanical Engineering. All rights reserved. ^Visiting Scholar. 'Assistant Professor, Senior Member AIAA. (a, b, d}. The stall-delay model is consistent with the blade element/momentum theory method and the Viterna/Tangler model, and the 3-D stall-delay model can be incorporated into the state of the art performance prediction codes, such as PROP. Through comparison with the field test data, the new model for 3-D stall-delay shows good agreement between predictions and experiments. The new model should be of great use in existing codes for horizontal axis wind turbine design and analysis.

A Study on Stall-Delay for Horizontal Axis Wind Turbine

An Insight into the Separate Flow and Stall Delay for HAWT

A 3-D Stall-Delay Model for Horizontal Axis Wind Turbine Performance Prediction

3D Stall Delay Effect Modeling and Aerodynamic Analysis of Swept-Blade Wind Turbine

Investigation on airfoil dynamic stall of horizontal axis wind turbine

A New Stall Delay Model for HAWT Based on Inviscid Theory

3-D stall-delay model for HAWT performance prediction: III. Model improvement

3-D numerical simulation of aerodynamic performance of horizontal-axis wind turbine

The Aerodynamic Performance of Horizontal Axis Wind Turbines under Rotation Condition

3-D stall-delay model for HAWT performance prediction: II. Model and its applications

Wind Tunnel Experiments and Numerical Study on Performance Characteristics of an H-type Vertical Axis Wind Turbine in the Spanwise Direction

EFFECT OF ROTATION ON BLADE BOUNDARY LAYER OF WIND TURBINE

The Effect of Rotation on the Boundary Layer of A Wind Turbine Blade

Dynamic-stall-driven vertical axis wind turbine: An experimental parametric study

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Laser Doppler Velocimetry (LDV) Measurements of Airfoil Surface Flow on a Horizontal Axis Wind Turbine in Boundary Layer

AN EXPERIMENTAL STUDY OF THE WAKE STRUCTURE OF A MODEL HORIZONTAL-AXIS WIND TURBINE

Numerical Simulation of a Wind Turbine Airfoil: Dynamic Stall and Comparison with Experiments

Unsteady aerodynamic characteristics of a horizontal wind turbine under yaw and dynamic yawing

Experimental Investigations of Airfoil Surface Flow of a Horizontal Axis Wind Turbine with LDV Measurements

Vorticity and Its Relationship to Vortex Separation, Dynamic Stall, and Performance, in an H-Darrieus Vertical-Axis Wind Turbine Using CFD Simulations