Abstract:Most design and analysis methods widely used for horizontal axis wind turbine performance prediction, such as the PROP code, are based on the traditional 2-D blade element/momentum theory (BEMT) methods, which are inadequate and underpredict the wind turbine rotor power output in the high-wind/peak-power condition, owing to effects of rotation on the wind turbine blade boundary layer. Although the deficiencies of the methods have been known for some time, this area has been neglected. The continued development of viable and well-established stall-regulated wind-turbine technology makes this research topic timely and particularly relevant to reducing the cost of wind energy. The main aim of the present paper is to describe and analyze the fundamental flow phenomena that characterize the boundary layer on rotating blades, and to develop a preliminary stall-delay model that modifies the 2-D airfoil data so as to simulate the 3-D stall-delay effects. The following steps were taken in the development of the model: 1) analysis of the 3-D integral boundarylayer equations for a reference system rotating with the blade, 2) description of the effects of rotor rotation on the separation point and its causes, and 3) determination of a simple correction formula to obtain rotating rotor lift coefficient Ci(a) and drag coefficient Cd(a) data from measured 2-D airfoil data. The preliminary 3-D stall-delay model consists of two key parameters (the ratio of local chord to local radius c/r the ratio of rotation speed to freestream velocity A) and three empirical correction factors Copyright © 1998 by the American Institute of Aeronautics and Astronautics, Inc. and the American Society of Mechanical Engineering. All rights reserved. ^Visiting Scholar. 'Assistant Professor, Senior Member AIAA. (a, b, d}. The stall-delay model is consistent with the blade element/momentum theory method and the Viterna/Tangler model, and the 3-D stall-delay model can be incorporated into the state of the art performance prediction codes, such as PROP. Through comparison with the field test data, the new model for 3-D stall-delay shows good agreement between predictions and experiments. The new model should be of great use in existing codes for horizontal axis wind turbine design and analysis.

3-D stall-delay model for HAWT performance prediction: II. Model and its applications

3-D stall-delay model for HAWT performance prediction: III. Model improvement

A 3-D Stall-Delay Model for Horizontal Axis Wind Turbine Performance Prediction

A New Stall Delay Model for HAWT Based on Inviscid Theory

The Performance Prediction of the HAWT Using a Stall Model

An Insight into the Separate Flow and Stall Delay for HAWT

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

A Study on Stall-Delay for Horizontal Axis Wind Turbine

PERFORMANCE PREDICTION OF THE HAWT USING AN IMPROVED LIFTING LINE METHOD WITH A STALL DELAY MODEL

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

3-D numerical simulation of aerodynamic performance of horizontal-axis wind turbine

Aerodynamic Prediction of the High-Lift Common Research Model with Modified Turbulence Model

An improved dynamic stall model and its effect on wind turbine fatigue load prediction

3D Stall Delay Effect Modeling and Aerodynamic Analysis of Swept-Blade Wind Turbine

Analysis of Aerodynamic Characteristics of Vertical Axis Wind Turbine (VAWT) Based on Modified Double Multiple Stream Tube Model

Novel Machine-Learning-Based Stall Delay Correction Model for Improving Blade Element Momentum Analysis in Wind Turbine Performance Prediction

Aerodynamic Prediction of a CRM High-lift Configuration using a modified three equation turbulence mode

New vortex‐lift and tangential‐force models for HAWT aerodynamic load prediction

The Aerodynamic Noise Prediction of HAWT Based on Semi-empirical Equations

DYNAMIC STALL MODELLING OF HORIZONTAL AXIS WIND TURBINE IN YAW CONDITION

Numerical Simulation of a Wind Turbine Airfoil: Dynamic Stall and Comparison with Experiments