Abstract:Wind turbine blades experience excessive load due to inaccuracies in the prediction of aerodynamic loads by conventional methods during design, leading to structural failure. The blade element momentum (BEM) method is possibly the oldest and best-known design tool for evaluating the aerodynamic performance of wind turbine blades due to its simplicity and short processing time. As the turbine rotates, the aerofoil lift coefficient enhances, notably in the rotor’s inboard section, relative to the value predicted by 2D experimentation or computational fluid dynamics (CFD) for the identical angle of attack; this is induced by centrifugal pumping action and the Coriolis force, thus delaying the occurrence of stall. This rotational effect is regarded as having a significant influence on the rotor blade’s aerodynamic performance, which the BEM method does not capture, as it depends on 2D aerofoil characteristics. Correction models derived from the traditional hard computing mathematical method are used in the BEM predictions to take into account stall delay. Unfortunately, it has been observed from the earlier literature that these models either utterly fail or inaccurately predict the enhancement in lift coefficient due to stall delay. Consequently, this paper proposes a novel stall delay correction model based on the soft computing technique known as symbolic regression for high-level precise aerodynamic performance prediction by the BEM process. In complement to the correction model for the lift coefficient, a preliminary correction model for the drag coefficient is also suggested. The model is engendered from the disparity in 3D and 2D aerofoil coefficients over the blade length for different wind speeds for the NREL Phase VI turbine. The proposed model’s accuracy is evaluated by validating the 3D aerofoil coefficients computed from the experimental results of a second wind turbine known as the MEXICO rotor.

3-D stall-delay model for HAWT performance prediction: III. Model improvement

Novel Machine-Learning-Based Stall Delay Correction Model for Improving Blade Element Momentum Analysis in Wind Turbine Performance Prediction

An improved dynamic stall model and its effect on wind turbine fatigue load prediction

Analysis of Aerodynamic Characteristics of Vertical Axis Wind Turbine (VAWT) Based on Modified Double Multiple Stream Tube Model

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

New vortex‐lift and tangential‐force models for HAWT aerodynamic load prediction

Aerodynamic Prediction of the High-Lift Common Research Model with Modified Turbulence Model

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Several Modifications to Improve Numerical Stability of Leishmen-Beddoes Dynamic Stall Model

Research on three-dimensional wake model of horizontal axis wind turbine based on Weibull function

Aerodynamic Prediction of a CRM High-lift Configuration using a modified three equation turbulence mode

A Modified Reynolds-Averaged Navier–Stokes-Based Wind Turbine Wake Model Considering Correction Modules

Wind Turbine Performance in Controlled Conditions: BEM Modeling and Comparison with Experimental Results

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Mathematical modeling and performance evaluation of Ducted Horizontal-axis Helical Wind Turbines: Insights into aerodynamics and efficiency

An advanced three-dimensional analytical model for wind turbine near and far wake predictions

Numerical investigation of the average wind speed of a single wind turbine and development of a novel three-dimensional multiple wind turbine wake model

Wind Tunnel Experiments and Numerical Study on Performance Characteristics of an H-type Vertical Axis Wind Turbine in the Spanwise Direction

A new three-dimensional analytical model for wind turbine wake turbulence intensity predictions

Wind tunnel and numerical study of a small vertical axis wind turbine

One-dimensional Modeling for Tip Clearance Leakage Vortex Trajectory and Stall-Onset Prediction in Subsonic Centrifugal Impellers