Abstract:Understanding the aerodynamic performance of scaled-down models is vital for providing crucial insights into wind energy optimization. In this study, the aerodynamic performance of a scaled-down model (12%) was investigated. This validates the findings of the unsteady aerodynamic experiment (UAE) test sequence H. UAE tests provide information on the configuration and conditions of wind tunnel testing to measure the pressure coefficient distribution on the blade surface and the aerodynamic performance of the wind turbine. The computational simulations used shear stress transport and kinetic energy (SST K-Omega) and transitional shear stress transport (SST) turbulence models, with wind speeds ranging from 5 m/s to 25 m/s for the National Renewable Energy Laboratory (NREL) Phase VI and 4 m/s to 14 m/s for the 12% scaled-down model. The aerodynamic performance of both cases was assessed at representative wind speeds of 7 m/s for low, 10 m/s for medium, and 20 m/s for high flow speeds for NREL Phase VI and 7 m/s for low, 9 m/s medium, and 12 m/s for the scaled-down model. The results of the SST K-Omega and transitional SST models were aligned with experimental test measurement data at low wind speeds. However, the SST K-Omega torque values exhibited a slight deviation. The transitional SST and SST K-Omega models yielded aerodynamic properties that were comparable to those of the 12% scaled-down model. The torque values obtained from the simulation for the full-scale NREL Phase VI and the scaled-down model were 1686.5 Nm and 0.8349 Nm, respectively. Both turbulence models reliably predicted torque and pressure coefficient values that were consistent with the experimental data, considering specific flow regimes. The pressure coefficient was maximum at the leading edge of the wind turbine blade on the windward side and minimum on the leeward side. For the 12% scaled-down model, the flow simulation results bordering the low-pressure region of the blade varied slightly.

3-D numerical simulation of aerodynamic performance of horizontal-axis wind turbine

Numerical Investigation of the Impact of Wind Turbine Rotor on the Passive Cooler above Nacelle

Numerical simulation of internal flow in forward-curved centrifugal fan

Numerical Simulation on the Static Stall of Wind Turbine Blade

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Numerical Investigation of Aerodynamic Performances for NREL 5-MW Offshore Wind Turbine

CFD simulations of aerodynamic characteristics for the three-blade NREL Phase VI wind turbine model

Wind tunnel and numerical study of a small vertical axis wind turbine

Numerical Simulations of Aerodynamic Feature for Variable Speed Offshore Wind Turbine

Investigations of Flow Field with Different Turbulence Models on NREL Phase VI Blade

NUMERICAL SIMULATION OF THE AERODYNAMIC PERFORMANCE OF A SINGLE-STAGE TURBINE AT OFF-DESIGN WORKING CONDITIONS

Development and Validation of a CFD Technique for the Aerodynamic Analysis of HAWT

Performance Enhancement of Horizontal Axis Wind Turbine Using Numerical Techniques

Numerical Investigation on the Flow and Power of Small-Sized Multi-Bladed Straight Darrieus Wind Turbine

Numerical simulation of an airfoil for stall regulated HAWT rotors at large angles of attack

Prediction of the near wall flow behaviours of separation and transition for NREL phase VI wind turbine blade

Aerodynamic Performance and Numerical Validation Study of a Scaled-Down and Full-Scale Wind Turbine Models

Numerical Simulation on Small Scale Straight-Blade and Twisted-Blade Vertical Axis Wind Turbine

3D Numerical Investigation on the Aerodynamic Performance of an Air Cooled 4-Stage Turbine

Wind Tunnel Experiments and Numerical Study on Performance Characteristics of an H-type Vertical Axis Wind Turbine in the Spanwise Direction

Unsteady Navier-Stokes studies on loads, wake and dynamic stall characteristics of a two-bladed vertical axis wind turbine