Abstract:Poly(ethylene 2,5-furandicarboxylate) (PEF) is a fully biobased rigid polyester characterized by a high tensile modulus and strength. Poly(butylene adipate-co-terephthalate) (PBAT) is a petroleum-based flexible polyester. In this study, a series of PBAT/PEF blends with 1-50 wt% PEF contents were directly prepared by a melt blending method. The morphologies, thermal properties, crystal structures and mechanical properties of the blends were investigated. The SEM results showed that PEF was uniformly dispersed in the PBAT phase, which indicated that PBAT and PEF had good compatibility. Also, the PBAT/PEF blends displayed typical sea-island morphology structures, in which PBAT acted as a continuous phase and PEF was a discrete phase. The ATR-FTIR results showed that there was no interfacial bonding between PBAT and PEF in the blends. The TGA results displayed that thermal stability slightly deteriorated from 385.5 degrees C to 371.7 degrees C with increasing PEF content. The DSC results indicated that the blends had two T(g)s, corresponding to those of PBAT and PEF. The WAXD results showed that PEF did not change the crystal structure of PBAT and was amorphous in the blends. All the PBAT/PEF blends exhibited toughness behavior, with high elongation at break and impact strength. In particular, when the content of PEF was 1%, 3%, 5% or 7%, the blends showed excellent elongations at break, which were higher than those of PBAT (1005.8 +/- 114.2%) and PEF (6.0 +/- 0.4%). When the content of PEF was 40%, the impact toughness of the blends was 91.0 +/- 8.7 kJ m(-2), which was 4.5 times that of PBAT and 13 times that of PEF. These findings have important implications for the application of PEF and the design of blend materials with high toughness.

Toughening modification of PBT/PC blends by PTW

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening of PBT/PC Blends with Core-Shell Modifier

Toughening of Polylactide with Epoxy-Functionalized Methyl Methacrylate-Butadiene Copolymer

Properties of Poly(butylene Terephthalate)/bisphenol A Polycarbonate Blends Toughening with Epoxy-Functionalized Acrylonitrile–Butadiene–Styrene Particles

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Inhibited Transesterification on the Properties of Reactive Core-Shell Particles Toughened Poly(Butylene Terephthalate) and Polycarbonate Blends

Toughening PET/PC Blends with Ethylene-propylene-diene Rubber

Synergistic Effect of Polycarbonate on Reactive Core-Shell Particles Toughened Poly (butylene Terephthalate)

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

Toughened poly(butylene terephthalate) by epoxided ethylene-propylene-diene-rubber

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Tudy of the Compatibility and Properties of PBT/PC Blends

Modification of the Reactive Core-Shell Particles Properties to Prepare PBT/PC Blends with Higher Toughness and Stiffness

A Novel Biobased High Toughness PBAT/PEF Blends: Morphology, Thermal Properties, Crystal Structure and Mechanical Properties

Design of super-toughened, heat-resistant and antistatic polyethylene terephthalate-based blend composites by constructing a tenacious interface