Abstract:The paper presents study of failure initiation and complex failure mechanisms in bolted joints for fiber reinforced composite laminates using two different progressive damage models simulated through combination of FEA package ABAQUS® and FORTRAN. Maximum stress failure criteria and Yamda-Sun failure criteria are used along with different (compatible) sudden material degradation rules for identification of initial damage as well as detailed study of damage progression in the composite laminates with single bolted and double bolted joints having different geometries and different bolt arrangements. Selection of numerical models was based upon possibly simple and conservative approaches to save computation time as well as to predict safe values of joint strength. Both numerical models, programmed in FORTRAN, were simulated with and without assembly clearance as well as with different design parameters including margin distance, end distance, pitch distance, array pitch distance and the models found to be capable of tracing failure onset in all FE models and provided a very good understanding of failure mechanisms. Static strength prediction by both numerical models had an excellent agreement with each other for all the specimens. Though the static strength prediction by proposed PDMs is reasonably less from experimental value but the error in simulated values and experimental data is found to be very stable. Apart from the stability of error, excellent agreement has been found in the tendency of numerical model predictions to the scattered experimental data. The study also has a great potential to provide a strong basis for a very realistic and computationally inexpensive advanced PDM for bolted joints in composite Laminates as well as an easy and simple tool for comparing different laminate geometries and bolt arrangements.

Failure Analysis of Composite Bolted Joints and the Ply Scheme Optimization

The Effects of Criterions and Nonlinear on the Failure Strength for Bolted Joint in Composite Laminates

The Failure Analysis of Composite Bolted Joint Structure Based on a Nonlinear Model

Strength analysis method of composite mechanical joint by using the ply characteristic curve method

Analysis of the Influence Factors on the Mechanical Properties of Single-bolted Composite Laminates

Failure analysis on mechanical connection for composite material laminated board

Investigation of Bearing Strength of Single-Bolt Double-Lap Joints in Composite Laminate

On Numerical Modeling and Tensile Strength of Bolted Composite Joints

Improving Method for Analyzing Strength of Composite Material Bolted Joint

Failure Analysis of Single and Double Bolted Joints for Composite Laminates

Parametric Sensitivity Research of Interference-Fit Bolted Single-Lap Laminates Joint Based on an Improved Analytical Stiffness Model

An engineering approach to predict the bearing strength of single-bolted double-lapped joints in composite laminate

Strength and damage evolution of mid-thick composite laminates with countersunk bolt joints

Progressive Failure Analysis and Experiment Research of the Composite Bolted Connection

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

NUMERICAL FAILURE SIMULATION OF BOLT-LOADED COMPOSITE LAMINATE

Fatigue Behaviour and Failure Mechanism of the Thin/thick-Ply Hybrid Laminated Composite Bolted Joints

New method of PLY optimization design for stability of composite laminates

Physically based failure analysis method for laminated composites

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Experimental Study on Composites with Single-Lap Countersunk Head Bolt Joints