Abstract:A bi-material property method was proposed to describe mechanical properties of the unidirectional composite lamina. It divided the lamina into the fiber layer and the resin layer, which have different material properties and are responsible for the intra-laminar and inter-laminar properties, respectively. Furthermore, a finite element modelling method with the composite lamina simulated by the bi-material property method was presented. Combined with a Hashin-type failure criterion and a micromechanics-based material degradation model, a novel progressive damage model (PDM) was constructed for typical double-lap bolted joints. To validate the novel PDM, four double-lap, single-bolt joints with various width-to-hole-diameter ratios were designed and quasi-static tensile tests of the joints were performed. Numerical results of the novel PDM show better agreements with the experimental outcomes than the traditional PDMs. Besides, the novel PDM can describe the inter-laminar damage more precisely via a more reasonable simulation for the inter-laminar property of the lamina, and can also obtain more accurate deformation of the hole along the thickness direction of the laminate. Furthermore, influences of the width-to-hole-diameter ratio W/D on failure behaviours of the double-lap, single-bolt joint were revealed, and an optimal width-to-hole-diameter ratio was recommended for engineering practice. Combined with our previous study on effects of the end-distance-to-hole-diameter ratio E/D, a failure mode map with varying W/D and E/D was determined for the double-lap bolted joint. It is helpful for designers to seek safer designs of composite bolted joints because the W/D and E/D are key geometrical parameters that significantly affect failure behaviours of the joints.

Analysis of the Influence Factors on the Mechanical Properties of Single-bolted Composite Laminates

NUMERICAL FAILURE SIMULATION OF BOLT-LOADED COMPOSITE LAMINATE

The Effects of Criterions and Nonlinear on the Failure Strength for Bolted Joint in Composite Laminates

On Numerical Modeling and Tensile Strength of Bolted Composite Joints

Failure Analysis of Composite Bolted Joints and the Ply Scheme Optimization

An engineering approach to predict the bearing strength of single-bolted double-lapped joints in composite laminate

Parametric Sensitivity Research of Interference-Fit Bolted Single-Lap Laminates Joint Based on an Improved Analytical Stiffness Model

Investigation of Bearing Strength of Single-Bolt Double-Lap Joints in Composite Laminate

Research on Influence of Pre-tightening Force to Laminate Bolt Joint Strength

A Bi-Material Property Based FE Modelling Method for Progressive Damage Analyses of Composite Double-Lap Bolted Joints

The Failure Analysis of Composite Bolted Joint Structure Based on a Nonlinear Model

3D NUMERICAL CALCULATION OF DAMAGE ACCUMULATION FOR COMPOSITE SINGLE BOLTED JOINT

A Method to Evaluate Bearing Strength and Stiffness of Composite Joints

Strength and damage evolution of mid-thick composite laminates with countersunk bolt joints

Failure analysis on mechanical connection for composite material laminated board

Finite Element Model and Load Distribution Analysis for Three-Bolted Single-Lap Composite Joints

Analysis of the Bonded-bolted Hybrid Composite Joints' Strength and Influences

Mechanical Property of Single-Bolted Composite Laminates

Numerical Analysis on Tensile Properties of Composite Hybrid Bonded/bolted Joints with Flanging

Dispersibility and Reliability Analysis of Composite Laminates Bolted Joint

Strength Analyses of Three-dimensional Five-directional Braided Composites Lug