Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

The Effects of Criterions and Nonlinear on the Failure Strength for Bolted Joint in Composite Laminates

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

The Secondary and Tertiary Rays from Chemical Elements of Small Atomic Number Due to Primary X-Rays from a Molybdenum Target.

Application of Continuum Damage Mechanics Model for Composites in Progressive Failure Prediction of Bolted Joints

Coupled Continuum Damage Mechanics and Failure Envelope Method for Failure Prediction of Composite Multi-Bolt Joints

An improved 2D finite element model for bolt load distribution analysis of composite multi-bolt single-lap joints

Fatigue failure simulation of a double-lap composites-metal bolted joint structure

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

Experimental and Finite Element Research on the Failure Mechanism of C/C Composite Joint Structures under Out-of-Plane Loading

Failure prediction of irregular arranged multi-bolt composite repair based on finite fracture mechanics model

Prediction of the Net-Tension Strength of Single Bolt Joint Using the 0° Ply Strength and Fracture Toughness

Numerical study on failure behavior of open-hole composite laminates based on LaRC criterion and extended finite element method

Study on failure characteristics of fiber reinforced composite structural connections

Experimental and numerical studies on influence of impact damage and simple bolt repair on compressive failure of composite laminates

Tensile Failure Analysis of Carbon Fiber Composite Material L-shaped Joint

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation

Nonlinear Finite Element Based Contact Modeling for Bolted Joints in Composite Laminates