Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

Coupled Continuum Damage Mechanics and Failure Envelope Method for Failure Prediction of Composite Multi-Bolt Joints

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Application of Continuum Damage Mechanics Model for Composites in Progressive Failure Prediction of Bolted Joints

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

Progressive Failure Modelling of Double-Lap of Composite Bolted Joints Based on Puck's Criterion

Failure prediction of irregular arranged multi-bolt composite repair based on finite fracture mechanics model

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

An improved 2D finite element model for bolt load distribution analysis of composite multi-bolt single-lap joints

Strength prediction of composite π joint under bending load and study of geometric and material variations effects

Influence of Failure-Load Prediction in Composite Single-Lap Joints with Brittle and Ductile Adhesives Using Different Progressive-Damage Techniques

Failure prediction of marine non-planar composite π joints based on combined 2D material model and progressive damage method

Progressive Bearing Failure Analysis and Strength Prediction Method for the Initial Assembly and Tensile Process of Composite Bolted Joints

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Multiaxial Fatigue Life Prediction of Composite Bolted Joint under Constant Amplitude Cycle Loading

Micro-Mechanics of Failure for Fatigue Strength Prediction of Bolted Joint Structures of Carbon Fiber Reinforced Polymer Composite

A Coupled FE-FFT Multiscale Method for Progressive Damage Analysis of 3D Braided Composite Beam under Bending Load

A Novel Integrated Modeling Strategy for Predicting Damage Mechanisms and Energy Dissipation of Composite Stiffened Structures under Low-Velocity Impact and Compression

Prediction of the Net-Tension Strength of Single Bolt Joint Using the 0° Ply Strength and Fracture Toughness

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

An Improved Characteristic Length Method for Predicting the Single Bolt Joint Bearing Strength Considering Secondary Bending Effect