Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

Experimental and numerical studies on influence of impact damage and simple bolt repair on compressive failure of composite laminates

Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Numerical investigation of the low-velocity impact damage resistance and tolerance of composite laminates with preloads

Damage and residual compressive strength of multi-layer composite laminates after low velocity impact

Experimental and simulation study on bonded repaired low-velocity impact of carbon fiber reinforced plastic laminates for rail vehicles

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Experimental and Numerical Analysis for the Post-Buckling Behavior of Stiffened Composite Panels with Impact Damage

An Experimental and Numerical Study on Impact and Compression after Impact of Stiffened Composite Panels

Impact damage in composite aircraft structures-experimental testing and numerical simulation

A Novel Methodology to Research the Residual Compressive Mechanical Properties of Composite Stiffened Panel after Low Velocity Impact Based on Quantification Damage Simulation

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation

Finite element analysis on impact response and damage mechanism of composite laminates under single and repeated low-velocity impact

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Experimental and Numerical Analysis of Stitched Composite Laminates Subjected to Low-Velocity Edge-on Impact and Compression after Edge-on Impact

Numerical and experimental investigation of pre-damaged composite stiffened panel under axial compression

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading