Abstract:The paper presents study of failure initiation and complex failure mechanisms in bolted joints for fiber reinforced composite laminates using two different progressive damage models simulated through combination of FEA package ABAQUS® and FORTRAN. Maximum stress failure criteria and Yamda-Sun failure criteria are used along with different (compatible) sudden material degradation rules for identification of initial damage as well as detailed study of damage progression in the composite laminates with single bolted and double bolted joints having different geometries and different bolt arrangements. Selection of numerical models was based upon possibly simple and conservative approaches to save computation time as well as to predict safe values of joint strength. Both numerical models, programmed in FORTRAN, were simulated with and without assembly clearance as well as with different design parameters including margin distance, end distance, pitch distance, array pitch distance and the models found to be capable of tracing failure onset in all FE models and provided a very good understanding of failure mechanisms. Static strength prediction by both numerical models had an excellent agreement with each other for all the specimens. Though the static strength prediction by proposed PDMs is reasonably less from experimental value but the error in simulated values and experimental data is found to be very stable. Apart from the stability of error, excellent agreement has been found in the tendency of numerical model predictions to the scattered experimental data. The study also has a great potential to provide a strong basis for a very realistic and computationally inexpensive advanced PDM for bolted joints in composite Laminates as well as an easy and simple tool for comparing different laminate geometries and bolt arrangements.

The Failure Analysis of Composite Bolted Joint Structure Based on a Nonlinear Model

The Effects of Criterions and Nonlinear on the Failure Strength for Bolted Joint in Composite Laminates

On Numerical Modeling and Tensile Strength of Bolted Composite Joints

A Composite Bolted Joints Non-Linear Stiffness Model and Its Application

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Failure analysis on mechanical connection for composite material laminated board

3D NUMERICAL CALCULATION OF DAMAGE ACCUMULATION FOR COMPOSITE SINGLE BOLTED JOINT

Strength and damage evolution of mid-thick composite laminates with countersunk bolt joints

NUMERICAL FAILURE SIMULATION OF BOLT-LOADED COMPOSITE LAMINATE

Failure Analysis of Notched Composite Laminate with 3D Continuum Damage Mechanics

A Two-Dimensional Model for Pin-Load Distribution and Failure Analysis of Composite Bolted Joints

Failure Analysis of Single and Double Bolted Joints for Composite Laminates

Failure Analysis of Single-Lap Single-Bolt Composite Joints with Countersunk Fasteners

Progressive Failure Analysis and Experiment Research of the Composite Bolted Connection

Experimental and Numerical Study on Bearing Failure of Countersunk Composite–composite and Composite–steel Joints

Failure Analysis of Composite Bolted Joints and the Ply Scheme Optimization

Mesoscale Modelling of Progressive Damage and Failure in Single-Lap and Double-Lap Thin-Ply Laminated Composite Bolted Joints

Modeling on bearing behavior and damage evolution of single-lap bolted composite interference-fit joints

Progressive Failure Modelling of Double-Lap of Composite Bolted Joints Based on Puck's Criterion

Numerical Modeling on Load Bearing and Bypass Behavior of Bolted Single Lap Joints of Laminates