Abstract:The electrochemical impedance spectroscopy (EIS) of epoxy-coated aluminum alloy LY12 has been investigated during exposure to 3.5% NaCl solution. Using the continuous simulation of EIS by expanded general electrical model, the time-dependent impedance model of the alloy/coating/solution system was deduced. The results shown that the composite electrode displayed a barrier behavior before water and oxygen penetrated to alloy base. After water and oxygen reached the base, the impedance associated with corrosion of alloy base changed with the immersion time as following: (i) active corrosion period at the beginning (double-layer capacitance, Cdl, in parallel to the charge transfer resistance of electrochemical corrosion Rct), (ii) impeding of the diffusion of corrosion production at the intermediate period as a result of the presence of coated film (a constant phase element Zdiff was additionally in series with Rct), and (iii) appearance of the characteristic impedance related to Cl− ion-participating reaction with alloy base at the later stage. From the linear part of lnCc–t0.5 curve in the early immersion stage, the apparent diffusion coefficient of water was obtained. The diffusion coefficient of water and Cl− ion through the coating was also calculated by the required time for diffusion of permeation species through the coating to the metal interface obtained from the simulation of EIS data by which the occurrence of characteristic impedance element(s) corresponding to special species arrival can be determined.

Electrochemical Impedance Spectroscopy Analysis on the Electrochemical Dissolution of Aluminum in an Alkaline Solution

Electrochemical Impedance Spectroscopy Analysis on Aluminum Alloys in EXCO Solution

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

EIS Analysis on the Anodic Dissolution Process of Pure Aluminum in an Alkaline Solution

EIS analysis on the anodic dissolution kinetics of pure iron in a highly alkaline solution

Electrochemical study of active dissolution for aluminum in neutral NaCl solution

ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY OF Al ALLOYS DURING EXFOLIATION CORROSION

Electrochemical Dissolution of Aluminum Bronze in CuSO4Electrolytes

Exfoliation Corrosion of Aluminum Alloy AA7075 Examined by Electrochemical Impedance Spectroscopy

Determination of Water Uptake and Diffusion of Cl− Ion in Epoxy Primer on Aluminum Alloys in NaCl Solution by Electrochemical Impedance Spectroscopy

Investigation of Exfoliation Corrosion of Rolled Aa8090 Al-Li Alloy Using Electrochemical Impedance Spectroscopy

Electrochemical impedance spectroscopy during corrosion process of 8090 Al-Li alloy in EXCO solution

Anodic dissolution of aluminum in AlCl3-[BzMIM]Cl ionic liquid

Corrosion and Electrochemical Behaviors of Pure Aluminum in Novel KOH‐ionic Liquid‐water Solutions

Exfoliation Corrosion of Al-Li Alloy 2090-T6 in Exco Solution: A Study of Electrochemical Noise and Electrochemical Impedance Spectroscopy

EIS analysis on the anodic process of zinc in an alkaline solution

Anodic Dissolution of Aluminum in the Aluminum Chloride-1-Ethyl-3-methylimidazolium Chloride Ionic Liquid

Influences of Zinc Oxide and an Organic Additive on the Electrochemical Behavior of Pure Aluminum in an Alkaline Solution

Anodic Dissolution of Aluminum in KOH Ethanol Solutions

Anodic behavior of Fe in acidic AlCl3-EMIC ionic liquid

Impedance Models of Epoxy Coated LY12 Aluminum Alloys in NaCl Solution