Abstract:In this paper, three-dimensional exact solutions of adhesive contact between a pre-deformed compressible soft electroactive half-space and an axisymmetric rigid indenter are presented. The change of surface adhesion energy during the contact is examined by using the modified JKR model, which accounts for the real contact area instead of the projected area. With the help of new results in the potential theory method, all physical (field) variables are derived in terms of elementary functions for three common types of axisymmetric indenters (flat-ended, conical, and spherical). The analytical contact relations for different indenter geometries and material properties are provided and summarized in Tables 2 and 3 to serve a solid base for revealing the underlying electromechanical mechanism of soft electroactive materials. For numerical illustration, neo-Hookean isotropic electroactive material is considered. The simulation results clearly demonstrate that both the mechanical and electric biasing fields significantly affect the indentation measurement of the electroactive material. Moreover, at either micro- or nano-scale, adhesion plays a prominent role in the indentation responses. It is of interest that, even without adhesion, the normal stress somewhere in the contact region may become tensile under a prescribed pre-stretch when the biasing electric displacement exceeds a certain value. This abnormal phenomenon actually corresponds to surface instability of the half-space under the biasing field. In the case of adhesive contact, other than the surface instability, the value of surface adhesion energy between the probe and the sample will impose a constraint on the validity of indentation analysis within the linear elastic regime.

A generalized JKR-model for two-dimensional adhesive contact of transversely isotropic piezoelectric half-space

On the Contact and Adhesion of a Piezoelectric Half-Space under a Rigid Punch with an Axisymmetric Power-Law Profile

The elastic and electric fields for three-dimensional contact for transversely isotropic piezoelectric materials

A Unified Treatment of Axisymmetric Adhesive Contact on A Power-Law Graded Elastic Half-Space

Non-slipping JKR Model for Transversely Isotropic Materials

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

Mechanics of non-slipping adhesive contact on a power-law graded elastic half-space

Mechanics of adhesive contact on a power-law graded elastic half-space

The Axisymmetric Torsional Contact Problem of a Functionally Graded Piezoelectric Coated Half-Space

A Generalized Maugis-Dugdale Solution for Adhesion of Power-Law Graded Elastic Materials

An Axisymmetric Contact Problem of Piezoelectric Materials Based on the Couple Stress Theory

Axisymmetric Contact Analysis of Piezoelectric Materials with Surface Effect

On piezoelastic contact problem for a smooth punch

Analysis of A Three-Dimensional Fem Model of A Thin Piezoelectric Actuator Embedded in an Infinite Host Structure

A GENERALIZED MAUGIS MODEL FOR ADHESIVE CONTACT OF ARBITRARY AXISYMMETRIC ELASTIC OBJECTS

Adhesion between elastic cylinders based on the double-Hertz model

Adhesive Contact of A Power-Law Graded Elastic Half-Space with A Randomly Rough Rigid Surface

Generalized Maugis–Dugdale Model of an Elastic Cylinder in Non-Slipping Adhesive Contact with a Stretched Substrate

Sliding frictional and adhesive coupling contact analysis of FGPM layered half-space under an insulating indenter

Non-slipping adhesive contact of a rigid cylinder on an elastic power-law graded half-space

Exact Axisymmetric Adhesive Contact Analysis for a Pre-Deformed Soft Electroactive Half-Space