Abstract:A full self-consistent model (FSCM) of the axisymmetric adhesive contact between a rigid punch with an arbitrary surface shape and a power-law graded elastic half-space is developed. The self-consistent equation between the surface gap and the surface interaction (e.g., the Lennard-Jones force law) involves a nonlinear singular integral, posing a great challenge to numerical calculations. By applying the properties of Gauss's hypergeometric function, the integral singularity is eliminated in the numerical calculation through Riemann-Stieltjes integral. Case studies for power-law punch profiles are performed and the self-consistent equation can be expressed in a dimensionless form with three dimensionless parameters, namely a shape index, a gradient exponent, and a new generalized Tabor number. The FSCM results are obtained by solving the self-consistent equation through the surface central gap control method and Newton-Raphson iterative method. For large generalized Tabor numbers, the force- displacement curves are 'S-shaped' and condense to the extended JKR limit in the high-load branch. As the generalized Tabor number decreases, a continuous transition from the extended JKR model to the Bradley model for the adhesion of power-law graded materials is obtained. It is found that the pull-off force of a graded material usually depends on the three dimensionless parameters, but for some cases of the shape index, it is not sensitive to the gradient exponent when the generalized Tabor number is fixed. Asymptotic solutions are derived to predict the unstable jump points, which coincide well with the FSCM predictions. The FSCM is applied to validate the extended Maugis-Dugdale (M-D) model of graded materials and it is found that the accuracy of the original M-D-n-k model using the maximum strength condition to determine the cohesive stress is limited. By introducing the rigid-limit-consistency condition of the pull-off force to determine the cohesive stress, the M-D-n-k model is improved and its predictions show good consistency with the FSCM results.

Adhesive Contact of A Power-Law Graded Elastic Half-Space with A Randomly Rough Rigid Surface

Adhesive Contact on Randomly Rough Surfaces Based on the Double-Hertz Model

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

Adhesive Elastic Contact of Rough Surfaces with Power-Law Axisymmetric Asperities

Mechanics of adhesive contact on a power-law graded elastic half-space

Mechanics of non-slipping adhesive contact on a power-law graded elastic half-space

Non-slipping adhesive contact of a rigid cylinder on an elastic power-law graded half-space

Adhesive Behavior of Two-Dimensional Power-Law Graded Materials

Mechanics of Axisymmetric Adhesive Contact of Rough Surfaces Involving Power-Law Graded Materials

A Unified Treatment of Axisymmetric Adhesive Contact on A Power-Law Graded Elastic Half-Space

Plane Contact and Partial Slip Behaviors of Elastic Layers With Randomly Rough Surfaces

Adhesion of Graded Elastic Materials: A Full Self-Consistent Model and Its Application

Combined Effects of Viscoelasticity and Surface Roughness on the Adhesion Behavior of a Flat-End Cylindrical Microstructure

Two-dimensional finite element analysis of elastic adhesive contact of a rough surface

Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces

Adhesion of Elastic Wavy Surfaces: Interface Strengthening/weakening and Mode Transition Mechanisms

Mode-mixity-dependent adhesion of power-law graded elastic solids under normal load and substrate stretch-induced mismatch strain

Contacting Micro Asperity of a Deformable Surface

A Generalized Maugis-Dugdale Solution for Adhesion of Power-Law Graded Elastic Materials

Effect of Surface Tension on the Behavior of Adhesive Contact Based on Maugis‒Dugdale Model

An Elastic–plastic Hybrid Adhesion Model for Contacting Rough Surfaces in the Presence of Molecularly Thin Lubricant