Abstract:In this study, the wettability of amorphous carbon films was tuned by controlling the degree of plasma fluorination, and the degree of fluorination on the surface was characterized by varying the process variables in inductively coupled CF 4 plasmas. Surface wettability was characterized in terms of the contact angle, whereas the degree of surface fluorination was estimated by measuring the F/C atomic ratio using X-ray photoelectron spectroscopy. The relationship between the contact angle and F/C atomic ratio was investigated. The contact angle decreased from 59° to 20° as the F/C atomic ratio increased from 0 to 0.1 with a low degree of fluorination. The contact angle subsequently increased to 114° as the F/C atomic ratio increased to 0.46 with increased surface fluorination. The hydrophilicity, represented by a low contact angle, can be attributed to the large fraction of polar CF bonds on the surface at low fluorination, whereas the hydrophobicity, represented by a high contact angle, can be attributed to the CF 2 bonds on the surface at high fluorination. The effect of ions on surface fluorination was investigated in CF 4 plasma. The surface fluorine fraction increased from 0.026 to 0.31 as the ion density increased from 2.6 × 10 9 to 1.3 × 10 10 cm -3 , while it increased from 0.026 to 0.30 with an increase in ion energy from 15 to 140.5 eV. The degree of surface fluorination was modeled in terms of the adsorption and desorption rates of fluorine atoms with different radical densities, ion densities, and ion energies. Ion bombardment can increase fluorine adsorption by creating active sites on the surface. The average number of active sites for F radical adsorption per ion bombardment was estimated from the surface fluorination model. The modeled surface fluorine fraction demonstrated favorable agreement with our experimental results for CF 4 plasma fluorination at various ion densities and energies. This model indicates that the contribution of ions to the fluorination of the amorphous carbon surface is considerably larger than that of the F radicals.

Effect of R.F. Power on Structures and Properties of Amorphous Fluorinated Carbon Films Prepared by PSII

The Influence of Radio Frequency Power on the Characteristics of Carbon-Rich Hydrogenated Amorphous Silicon Carbide Films

The Effect of Radio Frequency Power on the Structural and Optical Properties of A-C:H Films Prepared by PECVD

Mechanical Characterization of Ultra-Thin Fluorocarbon Films Deposited by R.F. Magnetron Sputtering

Relationship between mechanical properties and chemical groups in a-C:F films prepared by RF unbalanced magnetron sputter deposition

A Field Emission Study of the Critical Parameters of Amorphous Carbon Films Deposited on a Variety of Carbonaceous Substrates

Investigation On Structure And Physical Properties Of Hydrogenated Amorphous Carbon Films

Electron Field Emission Studies from Amorphous Carbon Thin Films

Mechanical properties of amorphous hydrogenated carbon films fabricated on polyethylene terephthalate foils by plasma immersion ion implantation and deposition

Lower friction and higher wear resistance of fluorine-incorporated amorphous carbon films

Surface Wettability Control and Fluorination Modeling of Amorphous Carbon Films Fluorinated with CF 4 Plasma

Structure and gas-barrier properties of amorphous hydrogenated carbon films deposited on inner walls of cylindrical polyethylene terephthalate by plasma-enhanced chemical vapor deposition

Structural Investigation And Barrier Properties Of A-C : H Thin Films On Polymer By Pecvd

Spectral Characterization of Amorphous Fluorinated Carbon Film with a Low Dielectric Constant

Mechanical Properties of Tungsten Doped Amorphous Hydrogenated Carbon Films Prepared by Tungsten Plasma Immersion Ion Implantation

Morphological Characteristics and Optical Properties of Hydrogenated Amorphous Silicon Thin Films

Hydrophobic, Mechanical, and Tribological Properties of Fluorine Incorporated Hydrogenated Fullerene-Like Carbon Films

XPS Analysis of SiC Films Prepared by Radio Frequency Plasma Sputtering

Structural and mechanical properties of amorphous Si–C-based thin films deposited by pulsed magnetron sputtering under different sputtering powers

The influence of the growth conditions on the structural and optical properties of hydrogenated amorphous silicon carbide thin films

Influence of acetylene to argon flow rate ratios on structure and properties of hydrogenated amorphous carbon films produced on steel substrates by plasma immersion ion implantation and deposition