Abstract:The pressure shell is the most critical load-bearing component in submersible vehicles. It is mainly used to withstand the enormous seawater pressure. In this study, a corrugated stiffened pressure shell was proposed to address the problem of low compression performance of the traditional cylindrical pressure shell. Nine corrugated shells made of aluminum alloy with varying corrugation parameters were created using CNC machining. After welding and sealing treatment, hydrostatic pressure tests were conducted on the shells to investigate the impact of parameters such as wall thickness, number of corrugations, and corrugation height on their compression performance. The shells were measured using a 3D scanner, and the resulting data was used for reverse modeling. The analysis focused on the failure behavior of corrugated shells with geometric imperfections under uniform external pressure using nonlinear finite element analysis. The results indicate that increasing the wall thickness or corrugation height can significantly improve the compression performance of the shells. The position of collapse remains consistent with the location of the maximum Mises stress. Furthermore, it was discovered that the corrugated structure also has an additional advantage in retarding the generation and expansion of diamond-shaped defects on the shell surface. The equilibrium paths of all corrugated shells maintained a smooth and continuous state, demonstrating stable buckling behavior. The numerical calculations were in excellent agreement with the experimental results, highlighting the advantages of the reverse modeling technique. This study provides new insights for the structural design of submarine pressure shells and explores more reasonable and feasible stiffening methods.

Experimental study of dieless hydro-bulging near-soccer shape closed shell

Free bulging of thin-walled cylinders closed by two heavy plates

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Research on the deformation mechanism of egg-shaped shells in granular medium bulging

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Influence of unidirectional loading pusher head structure on the deformation law of bionic egg-shaped shells in internal high-pressure bulging

Hydrostatic failure behavior of externally pressurized ceramic egg-shaped shells

EXPERIMENTAL INVESTIGATION ON LIMIT PRESSURE OF ORTHOGONALLY INTERSECTING CYLINDRICAL SHELLS WITH DIFFERENT DIAMETERS

Experimental investigation and computer simulation on dynamic buckling behavior of liquid-filled cylindrical shells under axial impact

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Hydroforming and buckling of an egg-shaped shell based on a petal-shaped preform

Influence of Process Parameters on Thinning Ratio and Fittability of Bellows Hydroforming

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Development of a Kind of Ultrahigh Pressure Integration Device for Hydro-bulging in the Common Press

Development of Experimental Method to Improve Sheet Metal Formability by Transverse Normal Stress

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Collapse behavior of corrugated stiffened pressure shells under external hydrostatic pressure considering actual fabrication imperfections: A reverse modeling technique

Buckling performance of inner corrugated pressure shells under external hydrostatic pressure

Application of LBB Concept to Single-Curvature Polyhedron Hydro-bulging Technology for Manufacturing Spherical Vessels

Study on the Deformation Characteristics of the Sheet Hydroforming with a Movable Die