Abstract:The failure of the pressure hull is the key subsystem of underwater vehicles, and seriously threatens the vitality of the whole underwater vehicle. Moreover, the shock waves from underwater implosions of failure pressure hull will cause deformation and even collapse to the adjacent structures, which is detrimental to the vehicles such as underwater robots and manned deep submersible vehicles working in the deep sea environment. In this work, the open-source solver OpenRadioss is adopted to conduct the numerical analysis of the spherical pressure hull within the shock waves of the underwater implosion and structure deformation and failure. The compressible multiphase flow is simulated by the arbitrary Lagrange-Euler method with multi-physical materials and the structures are described by constitutive models of brittleness and metal ductility, respectively. Firstly, the underwater implosion of a thin-glass sphere is simulated. The pressure of shock waves is compared with the experiment to verify the accuracy of the numerical method. Secondly, the dynamic response of the spherical hollow ceramic pressure hulls with internal perfect gas is investigated accordingly to reveal the fluid-structure coupling effects of underwater implosion induced by the failure of brittle materials, where the structure no longer bears any pressure after failure. Finally, the underwater implosion under the same environment pressure is simulated based on the Johnson-Cook plasticity and failure model. The implosion characteristics in the failure process of metal pressure hulls are summarized by analyzing the coupling pressure, structural deformation and damage, and energy evolution, respectively. Moreover, the differences between the hollow brittle ceramic sphere and ductile titanium alloy sphere in the process of underwater implosion are discussed. The influence of fluid-structure interaction and the mechanism without different materials are analyzed for the spherical pressure hull, which provides a basis for the design and material selection of the pressure support structure of the underwater vehicle.

Hydrostatic failure behavior of externally pressurized ceramic egg-shaped shells

Failure behavior of the ceramic thin-walled cylindrical shell under the hydrostatic pressure

Three Phases Fluid-Structure Interactive Simulations of the Deepsea Ceramic Sphere's Failure and Underwater Implosion

Hydroforming and buckling of an egg-shaped shell based on a petal-shaped preform

Analysis, Simulation and Experimental Study of the Tensile Stress Calibration of Ceramic Cylindrical Pressure Housings

Dynamic Response of Ceramic Shell for Titanium Investment Casting under High Strain-Rate SHPB Compression Load

Strength damage behavior analysis of silicon carbide(SiC) ceramic cylindrical shells under hydrostatic pressure based on the state-based peridynamics

Experimental study on buckling behavior of composite cylindrical shells with and without circular holes under hydrostatic pressure

Failure Behavior of Corrugated Pressure Cylindrical Shells with Variable Wall Thickness under Uniform External Pressure

Buckling and failure behavior of the silicon carbide (SiC) ceramic cylindrical shell under hydrostatic pressure

Numerical Simulation and Analysis of the Underwater Implosion of Spherical Hollow Ceramic Pressure Hulls in 11000 M Depth

Collapse behavior of corrugated stiffened pressure shells under external hydrostatic pressure considering actual fabrication imperfections: A reverse modeling technique

Numerical simulation and analysis of the underwater implosion of spherical hollow ceramic pressure hulls in 110 0 0 m depth

Dynamic Fracture of Hen’s Eggshell under Impact Loading: A Combined Experimental, Theoretical and Numerical Study

Buckling performance of inner corrugated pressure shells under external hydrostatic pressure

Research on the deformation mechanism of egg-shaped shells in granular medium bulging

Numerical Simulation and Analysis of the Chain-Reaction Implosions of Multi-Spherical Hollow Ceramic Pressure Hulls in Deep-Sea Environment

Acoustic radiation performance of an egg-shaped multilayer shell of revolution under deep-sea environment

Failure of Silicon Nitride Ceramic Flotation Spheres at Critical State of Implosion

Numerical Study of Underwater Implosion of Spherical Pressure Hull on Deep-Sea Submersibles

Experimental investigation of the hydrostatic compression of a hollow glass microspheres/epoxy resin under high‐pressure conditions at the full ocean depth